Headlamp Replacement (Coupe with Halogen)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Headlamp (Coupe with Halogen)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V) .
1	Headlamp Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp WARNING: Refer to Halogen Bulb Warning . Procedure Disconnect the electrical wiring harness and remove the headlamp from the vehicle. Aim the headlamp after replacement. Refer to Headlamp Aiming (Coupe) .

Callout

Component Name

Preliminary Procedure
Remove front bumper fascia. Refer to Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V) .

Headlamp Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Headlamp

WARNING:

Refer to Halogen Bulb Warning .

Procedure

Disconnect the electrical wiring harness and remove the headlamp from the vehicle.
Aim the headlamp after replacement. Refer to Headlamp Aiming (Coupe) .