Section 136 (Exhaust System - 3.5L DURATEC (202KW/275PS))
WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Diagnosis And Testing
- Catalyst System
- Diagnostic Trouble Code (DTC) Chart
- Global Customer Symptom Code (GCSC) Chart
- Inspection and Verification
- Pinpoint Tests
- Pinpoint Test A: Catalyst Efficiency Monitor And Exhaust Systems
- Pinpoint Test B: Universal Ho2S (Heated Oxygen Sensor) Heater Circuit (Bank 1)
- Pinpoint Test C: Universal Ho2S (Heated Oxygen Sensor) Heater Circuit (Bank 2)
- Pinpoint Test D: Catalyst Monitor Sensor Heater Circuit (Bank 1)
- Pinpoint Test E: Catalyst Monitor Sensor Heater Circuit (Bank 2)
- Pinpoint Test F: Universal Ho2S (Heated Oxygen Sensor) And Catalyst Monitor Sensor Swapped Sensor Signals
- Pinpoint Test G: Universal Ho2S (Heated Oxygen Sensor) Circuit (Bank 1)
- Pinpoint Test H: Universal Ho2S (Heated Oxygen Sensor) Circuit (Bank 2)
- Pinpoint Test I: Catalyst Monitor Sensor Circuit (Bank 1)
- Pinpoint Test J: Catalyst Monitor Sensor Circuit (Bank 2)
- Pinpoint Test K: Exhaust Temperature Out Of Range
- Pinpoint Test L: Universal Ho2S (Heated Oxygen Sensor) Positive Current Control Circuit (Bank 1)
- Pinpoint Test M: Universal Ho2S (Heated Oxygen Sensor) Positive Current Control Circuit (Bank 2)
- Pinpoint Test N: Linear O2 (Oxygen) Sensor Control Chip
- Pinpoint Test O: Post Catalyst Fuel Trim System Too Rich/Lean
- Pinpoint Test P: Universal Ho2S (Heated Oxygen Sensor) Circuit Slow Response
- Pinpoint Test Q: Catalyst Monitor Sensor Circuit Slow Response
- Pinpoint Test R: Catalyst Monitor Sensor Lack Of Switches/Signal Stuck (Bank 1)
- Pinpoint Test S: Catalyst Monitor Sensor Lack Of Switches/Signal Stuck (Bank 2)
- Pinpoint Test T: Universal Ho2S (Heated Oxygen Sensor) Reference Voltage/Negative Current Control Circuit Open (Bank 1)
- Pinpoint Test U: Universal Ho2S (Heated Oxygen Sensor) Reference Voltage/Negative Current Control Circuit Open (Bank 2)
- Pinpoint Test V: Universal Heated Oxygen Sensor (Ho2S)
- Pinpoint Test W: Heated Oxygen Sensor (Ho2S)
- Pinpoint Test X: Fuel Control
- Exhaust System
- Catalyst System
- Removal And Installation