Pinpoint Test F : DTC P0701, P0984, P2700, P2701, P2702, P2703, P2704, P2705
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
The PCM monitors clutch applications. If a non-electrical clutch fault is detected, a DTC is set in memory.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P0701:00 Transmission Control System Range/Performance: No Sub Type Information This DTC indicates the PCM detected an intermittent clutch fault and may set with DTC P2700, P2701, P2702, P2703 and/or P2704. Resolve the more specific DTCs first. PCM P0984:00 Shift Solenoid "E" Control Circuit Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the overdrive clutch. It may set with either P0771 or P0772. If either of those DTCs are set, resolve them first. PCM P2700:00 Transmission Friction Element "A" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the forward clutch. It may set with either DTC P0751 or P0752. If either of those DTCs are set, resolve them first. PCM P2701:00 Transmission Friction Element "B" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the direct clutch. It may set with either P0761 or P0757. If either of those DTCs are set, resolve them first. PCM P2702:00 Transmission Friction Element "C" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the intermediate clutch. It may set with either P0761 or P0762. If either of those DTCs are set, resolve them first. PCM P2703:00 Transmission Friction Element "D" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the low/reverse clutch. It may set with either P0766 or P0767. If either of those DTCs are set, resolve them first. PCM P2704:00 Transmission Friction Element "E" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the overdrive clutch. It may set with either P0771 or P0772. If either of those DTCs are set, resolve them first. PCM P2705:00 Transmission Friction Element "F" Apply Time Range/Performance: No Sub Type Information This DTC indicates the PCM detected a non-electrical fault in the application of the one-way clutch. Possible Sources
- Clutch stuck on
- Clutch stuck off
- Clutch slipping
- F1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the DTC from the PCM.
- Road test the vehicle. REFER to: Road Testing Vehicle .
- Using a diagnostic scan tool, carry out the KOEO and KOER PCM self-tests.
Are DTCs P0701, P2700, P2701, P2702, P2703, P2704 and/or P2705 present in the PCM?
Yes If DTC P0701 returns alone, REFER to: Diagnosis By Symptom . For P2700, if either DTC P0751 or P0752 are set, resolve those first. Otherwise, REFER to: Forward Clutch Assembly . For P2701, if either DTC P0756 or P0757 are set, resolve those first. Otherwise, REFER to: Direct Clutch Assembly . For P2702, if either DTC P0761 or P0762 are set, resolve those first. Otherwise, REFER to: Intermediate Clutch Assembly . For P2703, if either DTC P0766 or P0767 are set, resolve those first. Otherwise, REFER to: Low/Reverse Clutch Assembly . For P0984 and/or P2704, if either DTC P0771 or P0772 are set, resolve those first. Otherwise, REFER to: Overdrive Clutch Assembly . For DTC P2705, REFER to: Low One-Way Clutch Assembly . No The fault is not present at this time and may be intermittent.