Install the backrest cover of the front seat backrest

• Place the backrest cover (2) onto the upholstery.
• (1) Secure all trim wires with the clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the clamps (2).

  Parts:  Clamps

• Insert the clamp (2) with the special tool  0 492 668 (52 0 050)  .
• Clasp the trim wire (3) of the cushion (1) and the trim wire (4) of the backrest covering (5) with the clamp (2) and bend the clamp (2) shut.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to FITTING THE SEAT COVER WITH THE CUSHION FOR THE FRONT SEAT .
• Refer to INSTALLING THIGH SUPPORT .
• Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION FOR THE FRONT SEAT .
• Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
• Refer to INSTALLING A COVER FOR BACKREST RELEASE .
• Refer to INSTALLING INNER COVER ON FRONT SEAT .
• Refer to INSTALLING OUTER COVER ON FRONT SEAT .
• Refer to INSTALLING THE GUIDE SLEEVE FOR THE FRONT HEAD RESTRAINT .
• Refer to INSTALLING THE HEAD RESTRAINT IN FRONT .
• Refer to INSTALLING FRONT SEAT .