Engine Oil Pan, Timing Case Cover, Crankcase Ventilation System, Crankshaft, Flywheel, & Engine Vibration Damper - Repair (G07)

• 11 13 Engine Oil Pan
  • 11 13 000 Remove and install, seal or replace oil sump (X7 xDrive40i 2019-2022)
    • Remove oil sump
    • Replacing oil sump: remount the oil-level sensor
    • Refitting oil pan
  • 11 13 010 Removing and installing/replacing upper oil sump section (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing the upper oil sump section
    • Replacing upper oil sump section
    • Installing the upper oil sump section
  • 11 13 020 Removing and installing/replacing the lower oil pan section (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove lower oil pan section
    • Replace the lower oil sump section
    • Install the lower oil pan section
• 11 14 Crankshaft Seal, Timing Case Cover
  • 11 14 005 Replacing front crankshaft seal (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Replacing front crankshaft seal
  • 11 14 005 Replacing front crankshaft seal (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Replacing front crankshaft seal
  • 11 14 110 Removing and installing/sealing or replacing lower timing case cover (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing rear timing case cover
    • Replacement: Remount crankshaft sensor
    • Installing the rear timing case cover
  • 11 14 110 Removing and installing/sealing or replacing lower timing case cover (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing rear timing case cover
    • Replacement: Remount crankshaft sensor
    • Installing the rear timing case cover
  • 11 14 151 Replace the crankshaft seal (transmission side) (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Replacing the rear crankshaft seal
  • 11 14 151 Replace the crankshaft seal (transmission side) (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Replacing the rear crankshaft seal
  • 11 14 270 Removing and installing/replacing the rear acoustic cover (X7 xDrive40i 2019-2022)
    • Removing acoustic cover at rear
    • Installing acoustic cover at rear
  • 11 14 295 Removing and installing/replacing acoustic cover of oil pan (X7 xDrive40i 2019-2022)
    • Remove the acoustic cover of the oil sump
    • Install the acoustic cover for the oil sump
  • 11 14 080 Removing and installing/sealing or replacing top left timing case cover (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove timing case cover at top left
    • Install timing case cover at top left
  • 11 14 085 Removing and installing/sealing or replacing top right timing case cover (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove timing case cover at top right
    • Install timing case cover at top right
  • 11 14 141 Replacing radial shaft seal in the timing case cover (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Replacing front crankshaft seal
  • 11 14 612 Removing and installing/sealing or replacing lower timing case cover (engine removed) (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove timing case cover, bottom
    • Install timing case cover, bottom
• 11 15 Crankcase Ventilation System
  • 11 15 001 Replace engine ventilation line (X7 xDrive40i 2019-2022)
    • Replace engine ventilation line
  • 11 15 510 Measuring internal engine pressure (X7 xDrive40i 2019-2022)
    • Checking the internal engine pressure
  • 11 15 017 Removing and installing/replacing crankcase ventilation system intake pipe (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing the intake pipe the engine ventilation line
    • Installing the intake pipe of the engine ventilation line
  • 11 15 021 Removing and installing/replacing all engine ventilation lines (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing all the engine ventilation lines
    • Installing all the engine ventilation lines
  • 11 15 050 Removing and installing/replacing engine ventilation line, cylinder 1-4 (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove engine vent line of cylinders 1 to 4
    • Install the engine ventilation line of cylinders 1 to 4
  • 11 15 051 Removing and installing/replacing engine ventilation line, cylinder 5-8 (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Remove engine vent line of cylinders 5 to 8
    • Install the engine ventilation line of cylinders 5 to 8
  • 11 15 140 Replacing oil separator for crankcase ventilation system (Active oil separator) (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Replacing the left oil separator
    • Replacing the right oil separator
  • 11 15 510 Measuring internal engine pressure (After vehicle diagnosis) (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Checking internal engine pressure
• 11 21 Crankshaft And Bearings
  • Table for classifying main bearing shells 1, 2, 3, 5, 6 (X7 xDrive40i 2019-2022)
  • Table for classifying main bearing shell 7 (X7 xDrive40i 2019-2022)
  • Table for classifying guide bearing shell 4 (X7 xDrive40i 2019-2022)
  • 11 21 001 Replace crankshaft (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing crankshaft
    • Determining the classification of the crankshaft main bearing shell
    • Replacing the main bearing shells and the guide bearing shells
    • Installing the crankshaft
    • Checking the crankshaft side clearance
    • Check the coefficient of friction for the crankshaft
  • 11 21 001 Replace crankshaft (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing crankshaft
    • Determining the classification of the crankshaft main bearing shell
    • Replacing the main bearing shells and the guide bearing shells
    • Installing the crankshaft
    • Checking the crankshaft side clearance
    • Check the coefficient of friction for the crankshaft
  • 11 21 531 Replacing all crankshaft main bearing shells (Crankshaft removed) (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Determining the classification of the crankshaft main bearing shell
    • Replacing the main bearing shells and the guide bearing shells
  • 11 21 531 Replacing all crankshaft main bearing shells (Crankshaft removed) (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Determining the classification of the crankshaft main bearing shell
    • Replacing the main bearing shells and the guide bearing shells
  • 11 21 500 Replace crankshaft (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing crankshaft
    • Remove the gear from the crankshaft
    • Install the gear on the crankshaft
    • Installing the crankshaft
• 11 22 Flywheel
  • 11 22 000 Removing and installing/replacing the flywheel (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing flywheel
    • Installing the flywheel
  • 11 22 000 Removing and installing/replacing the flywheel (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing flywheel
    • Installing the flywheel
  • 11 22 000 Removing and installing/replacing the flywheel (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing flywheel
    • Installing the flywheel
• 11 23 Engine Vibration Damper
  • 11 23 010 Removing and installing/replacing vibration damper (vehicles with 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing the vibration damper
    • Replacing front crankshaft seal
    • Installing the vibration damper
  • 11 23 010 Removing and installing/replacing vibration damper (vehicles without 48V mild hybrid system) (X7 xDrive40i 2019-2022)
    • Removing the vibration damper
    • Replacing front crankshaft seal
    • Installing the vibration damper
  • 11 23 010 Removing and installing/replacing vibration damper (X7 xDrive50i 2019-2020, X7 M50i 2020-2022)
    • Removing the vibration damper
    • Replacing front crankshaft seal
    • Installing the vibration damper