Removing the intake pipe the engine ventilation line
Precondition
- Ignition is switched off.
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
WARNING:
Hot fluids
.
Risk of scalding!
Risk of scalding!
- Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING RIGHT INTAKE SILENCER HOUSING .
- Refer to REMOVING THE RIGHT INTAKE SILENCER BRACKET .
- Refer to REMOVING THE SOUND INSULATION OF INJECTORS ON RIGHT .
- Remove retaining clip (1).
- Feed out and remove the intake pipe (2).
- Unclip the intake pipe (1) from the holder in the area (2).
- Unlock the retaining clip (1) with a suitable screwdriver.
- Remove the intake pipe (2) in an upwards direction.