Replacing the cushion for the front seat backrest

NOTE: TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Version with seat climate control:
Push the heating mat (1) and upholstery (2) towards the side.

Unclip the fan (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace cushion.
Parts: Upholstery
Version with seat climate control:
Clip fan (1) into the cushion (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Version with seat climate control:
If applicable, cut the support (1) to fit the upholstery (2).

Secure the support (1) to the Velcro fasteners (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Version with seat heating:
Position the heating mat (1) on the cushion and align.

Bond the heating mat (1) with adhesive in the areas (2) with the cushion.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE BACKREST COVER OF THE FRONT SEAT BACKREST .
Refer to INSTALLING THE DRIVE FOR HEAD RESTRAINT HEIGHT ADJUSTMENT .
Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION FOR THE FRONT SEAT .
Refer to INSTALLING THE HEAD RESTRAINT .
Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
Refer to INSTALLING THE SEAT COVER FOR THE FRONT SEAT .
Refer to INSTALLING SEAT COVER WITH CUSHION FOR PASSENGER SEAT .
Refer to INSTALLING THIGH SUPPORT .
Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
Refer to INSTALLING OUTER COVER ON FRONT SEAT .
Refer to AFTER CONTINUING WORK ON THE FRONT SEAT: DISCONNECTING THE FRONT SEAT FROM THE WIRING HARNESS OF THE VEHICLE AND REMOVING IT FROM THE UNIVERSAL SEAT MOUNT .
Refer to INSTALLING FRONT PASSENGER SEAT .