Installing the drivetrain for the roller sunblind

Precondition 

The roller sunblind is open.

• Guide in drivetrain (3)  for the roller sunblind and position it correctly.
• Connect connectors (2)  and lock.
• Tighten down screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to COMPLETELY INSTALLING THE SLIDING/TILTING SUNROOF .
• Refer to INSTALLING THE HEADLINING (WITH SLIDING/TILTING SUNROOF) (LOWERED) .
• Refer to INSTALLING D-PILLAR TRIM PANEL ON LEFT AND RIGHT .
• Refer to INSTALLING COVER OF THE LUGGAGE COMPARTMENT SIDE SHELF LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT C-PILLAR TRIM PANEL .
• Refer to INSTALLING THE GRAB HANDLE AT THE REAR LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT B-PILLAR TRIM PANEL PARTIALLY .
• Refer to INSTALLING INTERIOR ROOF LIGHT .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE SUN VISORS AND COUNTER SUPPORT ON THE LEFT AND RIGHT .
• Refer to INSTALLING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
• Refer to INSTALLING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to ADJUSTING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to INSTALLING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .
• Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .