Section 1768 (Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers))
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Side trim (sill side), removing and installing
- Tunnel-side side trim, removing and installing
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Four-way lumber support, removing and installing - up to 06.06
- Four-way lumbar support positioning motors, removing and installing
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036, connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246, assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246, removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support positioning motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Seatbench, removing and installing - vehicles from 11.04
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Rear Recaro seats
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Backrest cover and padding, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Cover and cushion for seat pan, removing and installing (sport seat)
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Backrest cover and padding, removing and installing
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat cushion and cover of front RS sport seat
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Divided backrest cover and upholstery, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Front seat covers and upholstery