Driver And Passenger Side Airbag
The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.
Removing
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, GENERAL SAFETY PRECAUTIONS .
-- Mount the fixture for seat repairVAS 6136 on the engine and transmission holderVAS 6095.
-- Remove front seat. Refer to FRONT SEAT
-- Attach the seat to the fixture for seat repairVAS 6136.
-- Remove front right seat trim. Refer to RIGHT SEAT TRIM
Vehicles with manual seat adjustment
-- Remove front left seat trim. Refer to LEFT SEAT TRIM
Vehicles with electric seat adjustment
-- Remove left power seat trim. Refer to LEFT POWER SEAT TRIM
All vehicles
-- Remove front seat backrest. Refer to LEFT FRONT SEAT BACKREST
-- Remove cover and cushion from the front seat backrest. Refer to FRONT SEAT BACKREST COVER AND CUSHION
-- Separate wiring harness -1- from backrest frame.
-- Remove bolt -2- (9 Nm).
-- Remove side airbag -3- from mounting in backrest frame.
Installing
-- Install in reverse order of removal.
-- Switch on ignition.
Make sure that no persons are in the vehicle.
-- Connect the battery. Refer to [For transmission(s) 0A4, 02E, 09G, 02Q] [For engine(s) BGP, BPY, BGQ, CBTA, CBUA, CCTA, CBFA] Removal and Installation .