Left Front Seat Backrest
The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.
Removing
-- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
-- Remove the front seat. Refer to FRONT SEAT .
-- Attach the seat to the fixture for seat repair VAS 6136.
-- Remove front right seat trim. Refer to RIGHT SEAT TRIM
Vehicles with manual seat adjustment
-- Remove front left seat trim LEFT SEAT TRIM
Vehicles with electric seat adjustment
-- Remove left power seat trim. Refer to LEFT POWER SEAT TRIM
All vehicles
-- Disengage retaining straps from backrest cover on underside of seat frame.
-- Remove wiring harnesses from side airbag and seat heating from seat base, if necessary.
-- Remove two bolts each on left and right sides -1- and -2- (34.5 Nm).
The bolts are microencapsulated and must therefore be replaced after every removal.
Before installing the new screws, the threads of the corresponding nuts must be cleaned.
-- Remove the backrest from the seat frame.
Installing
-- Install in reverse order of removal.