Transmission And Bevel Box Seal Overview
WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
Never loosen both left and right flange shaft bolts at the same time. If the differential bevel gears rotate themselves, the bolts are difficult to reinstall.
- Inspection Plug
- Refer to BEVEL BOX OIL LEVEL, CHECKING .
- Bevel Box Output Flange Seal
- Removing and installing, refer to BEVEL BOX OUTPUT FLANGE SEAL .
- Selector Shaft Lever Seal
- Removing and installing, refer to SELECTOR SHAFT LEVER SEAL .
- Left Flange Shaft Seal
- Removing and installing, refer to LEFT FLANGE SHAFT AND SEAL .
- Seal, Between Transmission and Bevel Box, Transmission Side
- Removing and installing, refer to SEAL, BETWEEN TRANSMISSION AND BEVEL BOX, TRANSMISSION SIDE .
- Seal, Between Bevel Box and Transmission, Bevel Box Side
- Removing and installing, refer to SEAL, BETWEEN BEVEL BOX AND TRANSMISSION, BEVEL BOX SIDE .
- Right Flange Shaft Seal
- Removing and installing, refer to RIGHT FLANGE SHAFT SEAL .