LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) >> Navigation Receiver >> Removal [12/2015 - 11/2017] >> Procedure

Removal [12/2015 - 11/2017]: Procedure

  1. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 15 )

  2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL 

    (Refer to PROCEDURE - Step 16 )

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 12 [12/2015 - 08/2016] Refer to PROCEDURE - Step 12 [08/2016 - ] )

  4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 

    (Refer to PROCEDURE - Step 3 )

  5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY 

    (Refer to PROCEDURE - Step 13 [12/2015 - 08/2016] Refer to PROCEDURE - Step 13 [08/2016 - ] )

  6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 28 )

  7. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      GTY479601Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 3 guides.
    3. Disconnect the connectors to remove the navigation receiver assembly with bracket.
  8. REMOVE NAVIGATION WIRE 

    (Refer to PROCEDURE - Step 2 )

  9. REMOVE NO. 1 RADIO RECEIVER BRACKET 

    (Refer to PROCEDURE - Step 3 )

  10. REMOVE NO. 2 RADIO RECEIVER BRACKET 

    (Refer to PROCEDURE - Step 4 )

  11. REMOVE STEREO COMPONENT TUNER ASSEMBLY 

    (Refer to PROCEDURE - Step 5 )

scientia non olet · About LEMON Manuals