LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Prius Prime Plus >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery Control System - Service Information (3 Of 3) >> Battery Blower >> Removal [09/2016 - 05/2019] >> Procedure

Removal [09/2016 - 05/2019]: Procedure

  1. REMOVE TONNEAU COVER ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE REAR NO. 2 FLOOR BOARD 

    Refer to PROCEDURE - Step 2

  3. REMOVE REAR NO. 4 FLOOR BOARD 

    Refer to PROCEDURE - Step 3

  4. REMOVE REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 4

  5. REMOVE REAR NO. 1 FLOOR BOARD 

    Refer to PROCEDURE - Step 5

  6. REMOVE DECK FLOOR BOX LH 

    Refer to PROCEDURE - Step 6

  7. REMOVE DECK FLOOR BOX RH 

    Refer to PROCEDURE - Step 7

  8. REMOVE DECK TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 2

  9. REMOVE REAR DECK TRIM COVER 

    Refer to PROCEDURE - Step 9

  10. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side) 

    Refer to PROCEDURE - Step 1

  11. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side) 

    Refer to PROCEDURE - Step 2

  12. REMOVE REAR SEATBACK ASSEMBLY LH 

    Refer to PROCEDURE - Step 3

  13. REMOVE REAR SEAT CUSHION ASSEMBLY LH 

    Refer to PROCEDURE - Step 6

  14. REMOVE REAR SEAT CUSHION LOCK HOOK (for LH Side) 

    Refer to PROCEDURE - Step 8

  15. REMOVE REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 14

  16. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 15 [09/2016 - 12/2018] , or refer to PROCEDURE - Step 15 [12/2018 - 05/2019]

  17. REMOVE REAR UNDER SIDE COVER LH 

    Refer to PROCEDURE - Step 31

  18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 32

  19. REMOVE REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 33

  20. REMOVE ROPE HOOK (for LH Side without Garage Door Opener System) 

    Refer to PROCEDURE - Step 34

  21. REMOVE NO. 2 ROPE HOOK (for LH Side without Garage Door Opener System) 

    Refer to PROCEDURE - Step 35

  22. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for LH Side with Garage Door Opener System) 

    Refer to PROCEDURE - Step 36

  23. REMOVE TONNEAU COVER HOOK A (for LH Side with Garage Door Opener System) 

    Refer to PROCEDURE - Step 37

  24. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to PROCEDURE - Step 38

  25. REMOVE REAR SEATBACK HINGE COVER 

    Refer to PROCEDURE - Step 4

  26. REMOVE REAR SEATBACK ASSEMBLY RH 

    Refer to PROCEDURE - Step 5

  27. REMOVE REAR SEAT CUSHION ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 7

  28. REMOVE REAR SEAT CUSHION LOCK HOOK (for RH Side) 

    Refer to PROCEDURE - Step 8

  29. REMOVE REAR DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 24

  30. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 16

  31. REMOVE REAR UNDER SIDE COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 40

  32. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 41

  33. REMOVE REAR SEAT SIDE GARNISH RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 42

  34. REMOVE ROPE HOOK (for RH Side without Garage Door Opener System) 

    Refer to PROCEDURE - Step 43

  35. REMOVE NO. 2 ROPE HOOK (for RH Side without Garage Door Opener System) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 44

  36. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for RH Side with Garage Door Opener System) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 45

  37. REMOVE TONNEAU COVER HOOK A (for RH Side with Garage Door Opener System) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 46

  38. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1

  39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 48

  40. REMOVE NO. 3 HYBRID BATTERY INTAKE DUCT (for LH Side) 
    1. Remove the 3 clips and No. 3 hybrid battery intake duct.
      GTY738014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  41. REMOVE NO. 3 HYBRID BATTERY INTAKE DUCT (for RH Side) 
    1. Remove the 3 clips and No. 3 hybrid battery intake duct.
      GTY718740Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  42. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT (for LH Side) 
    1. Remove the 2 clips and No. 1 hybrid battery intake duct.
      GTY718738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  43. REMOVE NO. 2 HYBRID BATTERY INTAKE DUCT (for LH Side) 
    1. Remove the 2 clips and No. 2 hybrid battery intake duct.
      GTY718739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  44. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT (for RH Side) 
    1. Remove the 2 clips and No. 1 hybrid battery intake duct.
      GTY718755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  45. REMOVE NO. 2 HYBRID BATTERY INTAKE DUCT (for RH Side) 
    1. Remove the 2 clips and No. 2 hybrid battery intake duct.
      GTY718753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  46. REMOVE BATTERY COOLING BLOWER ASSEMBLY (for LH Side) 
    1. Disconnect the battery cooling blower assembly connector.
      GTY718752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 nuts and battery cooling blower assembly.
  47. REMOVE BATTERY COOLING BLOWER ASSEMBLY (for RH Side) 
    1. Disconnect the battery cooling blower assembly connector.
      GTY718754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 nuts and battery cooling blower assembly.
scientia non olet · About LEMON Manuals