LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Prius C One >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (Service Information) >> Engine Unit >> Removal [06/2017 - ] >> Procedure

Removal [06/2017 - ]: Procedure

  1. REMOVE NO. 2 EGR PIPE 

    Refer to PROCEDURE - Step 2

  2. REMOVE EGR COOLER ASSEMBLY 

    Refer to PROCEDURE - Step 8

  3. REMOVE INTAKE MANIFOLD STAY 

    Refer to PROCEDURE - Step 5

  4. REMOVE INTAKE MANIFOLD 

    Refer to PROCEDURE - Step 6

  5. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR 

    Refer to PROCEDURE - Step 5

  6. REMOVE MANIFOLD SUPPORT BRACKET 

    Refer to PROCEDURE - Step 6

  7. REMOVE EXHAUST MANIFOLD (TWC: Front Catalyst) 

    Refer to PROCEDURE - Step 8

  8. REMOVE NO. 4 WATER BY-PASS HOSE 
    1. Disconnect the No. 4 water by-pass hose.
      GTY334377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and No. 4 water by-pass hose.
  9. REMOVE NO. 1 WATER BY-PASS PIPE 
    1. Disconnect the water hose from the water inlet with thermostat sub-assembly.
      GTY325874Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and No. 1 water by-pass pipe.
  10. REMOVE WIRE HARNESS CLAMP BRACKET 
    1. Remove the bolt and wire harness clamp bracket.
      GTY337386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE STUD BOLT 
    1. Using an E7 "TORX" socket wrench, remove the stud bolt.
      GTY324346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE ENGINE OIL LEVEL DIPSTICK 
    1. Remove the engine oil level dipstick.
  13. REMOVE NO. 1 IGNITION COIL 

    Refer to PROCEDURE - Step 1

scientia non olet · About LEMON Manuals