LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Hybrid Limited, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Hybrid) >> Rear Seat Inner Belt Assembly >> Installation

Rear Seat Inner Belt Assembly: Installation

  1. INSTALL REAR NO.2 SEAT BELT ASSEMBLY INNER 
    1. Install the 2 rear No.2 seat belt assembly inner with the 2 bolts.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Do not allow the anchor part of the rear No.2 seat belt assembly inner and the protruding parts of the floor panel to overlap.
      Fig 1: Identifying Bolts And Rear No.2 Seat Belt Assembly Inner
      G05242903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY 
    1. Install the rear seat lap type belt assembly with the bolt.
      Fig 2: Identifying Bolt And Rear Seat Lap Type Belt Assembly
      G05242901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  3. INSTALL DECK BOARD CHECK NO.1 
  4. INSTALL DECK SIDE TRIM BOX LH  (See INSTALLATION )
  5. REMOVE DECK SIDE TRIM BOX RH 
  6. INSTALL JACK CARRIER ASSEMBLY 
  7. INSTALL JACK ASSEMBLY 
  8. INSTALL JACK CARRIER SUPPORT 
  9. INSTALL REAR SEAT RECLINING COVER NO.2 LH  (See INSTALLATION )
  10. REMOVE REAR SEAT RECLINING COVER NO.2 RH 
  11. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
  12. REMOVE DECK FLOOR BOX REAR  (See INSTALLATION )
  13. INSTALL DECK BOARD SUB-ASSEMBLY NO.2 
  14. INSTALL DECK BOARD SUB-ASSEMBLY NO.3 
  15. INSTALL DECK BOARD SUB-ASSEMBLY 
  16. INSTALL TONNEAU COVER ASSEMBLY 
  17. INSTALL REAR SEAT BELT ASSEMBLY INNER 
    1. Install the rear seat belt assembly inner with the bolt.
      Fig 3: Locating Bolt And Rear Seat Belt Assembly Inner
      G05242899Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  18. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY (w/ Rear No. 2 Seat)  (See INSTALLATION )
  19. INSTALL RECLINING HINGE COVER RH (w/ Rear No. 2 Seat) 
  20. INSTALL VERTICAL ADJUSTER BRACKET COVER OUTER (w/ Rear No. 2 Seat) 
  21. INSTALL REAR SEAT CUSHION MOLDING REAR RH (w/ Rear No. 2 Seat) 
  22. INSTALL REAR SEAT CUSHION MOLDING RH (w/ Rear No. 2 Seat) 
  23. INSTALL REAR NO.1 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)  (See INSTALLATION )
  24. INSTALL SEAT TRACK COVER INNER RH (w/ Rear No. 2 Seat) 
  25. INSTALL REAR SEAT TRACK BRACKET COVER INNER RH (w/ Rear No. 2 Seat) 
  26. INSTALL REAR SEAT TRACK COVER RH (w/ Rear No. 2 Seat) 
  27. INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/ Rear No. 2 Seat) 
  28. INSPECT SLIDE ADJUSTER LOCK (w/ Rear No. 2 Seat)  (See INSTALLATION )
  29. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY (w/ Rear No. 2 Seat)  (See REASSEMBLY )
  30. INSTALL REAR SEAT CUSHION MOLDING REAR LH (w/ Rear No. 2 Seat) 
  31. INSTALL RECLINING HINGE COVER LH (w/ Rear No. 2 Seat) 
  32. INSTALL VERTICAL ADJUSTER BRACKET COVER LH (w/ Rear No. 2 Seat) 
  33. INSTALL REAR SEAT CUSHION MOLDING LH (w/ Rear No. 2 Seat) 
  34. INSTALL CENTER SEATBACK ASSEMBLY (w/ Rear No. 2 Seat)  (See INSTALLATION )
  35. INSTALL SEAT TRACK UPPER RAIL COVER LH (w/ Rear No. 2 Seat) 
  36. INSTALL CENTER SEAT HINGE COVER UPPER RH (w/ Rear No. 2 Seat) 
  37. INSTALL RECLINING COVER PROTECTOR RH (w/ Rear No. 2 Seat) 
  38. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY (w/ Rear No. 2 Seat) 
  39. INSTALL REAR SEATBACK COVER (w/ Rear No. 2 Seat) 
  40. INSTALL TONNEAU COVER HOOK HOLDER (w/Rear No. 2 Seat) 
  41. INSTALL REAR NO.1 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)  (See INSTALLATION )
  42. INSTALL SEAT TRACK COVER INNER LH (w/ Rear No. 2 Seat) 
  43. INSTALL REAR SEAT TRACK BRACKET COVER INNER LH (w/ Rear No. 2 Seat) 
  44. INSTALL REAR SEAT TRACK COVER LH (w/ Rear No. 2 Seat) 
  45. INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/ Rear No. 2 Seat) 
  46. INSTALL RECLINING HINGE COVER (w/ Rear No. 2 Seat) 
  47. INSPECT SLIDE ADJUSTER LOCK (w/ Rear No. 2 Seat)  (See INSTALLATION )
  48. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY (w/o Rear No. 2 Seat)  (See REASSEMBLY )
  49. INSTALL REAR SEAT CUSHION MOLDING REAR RH (w/o Rear No. 2 Seat) 
  50. INSTALL REAR SEAT CUSHION MOLDING RH (w/o Rear No. 2 Seat) 
  51. INSTALL CENTER SEATBACK ASSEMBLY (w/o Rear No. 2 Seat)  (See INSTALLATION )
  52. INSTALL CENTER SEAT HINGE COVER UPPER LH (w/o Rear No. 2 Seat) 
  53. INSTALL RECLINING COVER PROTECTOR LH (w/o Rear No. 2 Seat) 
  54. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY (w/o Rear No. 2 Seat) 
  55. INSTALL REAR SEATBACK COVER (w/o Rear No. 2 Seat) 
  56. INSTALL TONNEAU COVER HOOK HOLDER (w/o Rear No. 2 Seat) 
  57. INSTALL REAR NO.1 SEAT ASSEMBLY RH (w/o Rear No. 2 Seat)  (See INSTALLATION )
  58. INSTALL REAR SEAT TRACK BRACKET COVER INNER (w/o Rear No. 2 Seat) 
  59. INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/o Rear No. 2 Seat) 
  60. INSPECT SLIDE ADJUSTER LOCK (w/o Rear No. 2 Seat)  (See INSTALLATION )
  61. INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY (w/o Rear No. 2 Seat)  (See REASSEMBLY )
  62. INSTALL REAR SEAT CUSHION MOLDING REAR LH (w/o Rear No. 2 Seat) 
  63. INSTALL REAR SEAT CUSHION MOLDING LH (w/o Rear No. 2 Seat) 
  64. INSTALL REAR NO.1 SEAT ASSEMBLY LH (w/o Rear No. 2 Seat)  (See INSTALLATION )
  65. INSTALL REAR SEAT TRACK BRACKET COVER INNER (w/o Rear No. 2 Seat) 
  66. INSTALL REAR SEAT TRACK BRACKET COVER OUTER (w/o Rear No. 2 Seat) 
  67. INSPECT SLIDE ADJUSTER LOCK (w/o Rear No. 2 Seat)  (See INSTALLATION )
scientia non olet · About LEMON Manuals