LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Reduction Drive Gear >> Installation

Reduction Drive Gear: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the reduction drive gear to secondary pulley.
    Fig 1: Reduction Drive Gear
    G08317982Courtesy of SUBARU OF AMERICA, INC.
  2. Select the reduction drive gear shim. <Ref. to ADJUSTMENT , Reduction Drive Gear.>
  3. Install the dish plates, spring retainers, and selected reduction drive gear shims.
    NOTE: Install the dish plate in the correct direction.
    Fig 2: Reduction Drive Gear Shim, Spring Retainer And Dish Plate
    G11572933Courtesy of SUBARU OF AMERICA, INC.
  4. Install the transmission case. <Ref. to INSTALLATION , Transmission Case.>
  5. Install the transmission control device. <Ref. to INSTALLATION , Transmission Control Device.>
  6. Install the oil strainer and oil pan. <Ref. to INSTALLATION , Oil Pan and Strainer.>
  7. Install the reduction driven gear assembly. <Ref. to INSTALLATION , Reduction Driven Gear.>
  8. Install the parking pawl. <Ref. to INSTALLATION , Parking Pawl.>
  9. Install the transfer driven gear assembly. <Ref. to INSTALLATION , Transfer Driven Gear.>
  10. Install the transfer clutch assembly. <Ref. to INSTALLATION , Transfer Clutch.>
  11. Install the extension case. <Ref. to INSTALLATION , Extension Case.>
  12. Install the inhibitor switch. <Ref. to INSTALLATION , Inhibitor Switch.>
  13. Install the secondary speed sensor. <Ref. to INSTALLATION , Secondary Speed Sensor.>
  14. Install the primary speed sensor. <Ref. to INSTALLATION , Primary Speed Sensor.>
  15. Install the turbine speed sensor. <Ref. to INSTALLATION , Turbine Speed Sensor.>
  16. Install the transmission harness. <Ref. to INSTALLATION , Transmission Harness.>
  17. Install the control valve body. <Ref. to INSTALLATION , Control Valve Body.>
  18. Install the air breather hose. <Ref. to INSTALLATION , Air Breather Hose.>
  19. Install the transmission assembly. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals