LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Transfer Driven Gear >> Installation

Transfer Driven Gear: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the transfer driven gear assembly.
    Fig 1: Transfer Driven Gear Assembly
    G10218727Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer clutch assembly. <Ref. to INSTALLATION , Transfer Clutch.>
  3. Select the transfer driven gear shim. <Ref. to ADJUSTMENT , Transfer Clutch.>
  4. Install the extension case. <Ref. to INSTALLATION , Extension Case.>
  5. Install the transmission assembly. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals