LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr690) >> Forward Clutch Assembly >> Installation

Forward Clutch Assembly: Installation

  1. Select a washer. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Forward Clutch Assembly>ADJUSTMENT .
  2. Install the selected washer.
    Fig 1: Identifying Forward Clutch Assembly Washer
    G06654568Courtesy of SUBARU OF AMERICA, INC.
  3. Install the forward clutch assembly.
    Fig 2: Installing Forward Clutch Assembly
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  4. Install the thrust needle bearing.
    NOTE: Install the thrust needle bearing in the correct direction.
    Fig 3: Installing Forward Clutch Assembly Thrust Needle Bearing
    G06654571Courtesy of SUBARU OF AMERICA, INC.
  5. Install the intermediate case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Intermediate Case>INSTALLATION .
  6. Install the transfer reduction driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transfer Reduction Driven Gear>INSTALLATION .
  7. Install the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transfer Clutch>INSTALLATION .
  8. Install the rear drive shaft. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Rear Drive Shaft>INSTALLATION .
  9. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Extension Case>INSTALLATION .
  10. Install the transmission to vehicle. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Automatic Transmission Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals