Instrumentation System & Driver Information Center (Diagnostics)

• Basic Diagnostic Procedure
  • Procedure
    • Combination Meter
    • MFD
• Check List for Interview
  • Check
• General Description
  • Caution
    • Airbag System
  • Inspection
  • Preparation Tool
    • Special Tool
    • General Tool
• Electrical Component Location
  • Location
• Control Module I/O Signal
  • Electrical Specification
• Subaru Select Monitor
  • Operation
  • Inspection
    • Communication For Initializing Impossible (Combination Meter)
    • Communication For Initializing Impossible (MFD)
• Read Diagnostic Trouble Code (DTC)
  • Operation
    • Combination Meter
    • MFD
• Clear Memory Mode
  • Operation
    • Combination Meter
    • MFD
• Read Current Data
  • Operation
    • Combination Meter
    • MFD
  • List
• System Operation Check Mode
  • Operation
    • Combination Meter
  • List
• User Customizing
  • Operation
    • Combination Meter
  • List
• List of Diagnostic Trouble Code (DTC)
  • List
• Diagnostic Procedure with Diagnostic Trouble Code (DTC)
  • DTC U0073: Control Module Communication Bus Off
  • DTC U0100: Lost Communication With ECM/Pcm "A"
  • DTC U0101: Lost Communication With TCM
  • DTC U0122: Lost Communication With Vehicle Dynamics Control Module
  • DTC U0131: Lost Communication With Power Steering Control Module
  • DTC U0140: Lost Communication With Body Control Module
  • DTC U0151: Lost Communication With Restraints Control Module
  • DTC U0164: Lost Communication With HVAC Control Module
  • DTC U0327: Software Incompatibility With Vehicle Security Control Module
  • DTC U1201: Can-HS Counter Abnormal
  • DTC U1650: Invalid Data Received From Meter (UART)
  • DTC U1651: Lost Communication With Meter (UART)
  • DTC B2220: Break The Wire Of IGN
  • DTC B2222: System Microcomputer Fail
  • DTC B2223: GERDA Malfunction
  • DTC B1500: Fuel Sender Open/Short-Circuit Detection
  • DTC B1501: Power Supply System Error Detection
  • DTC B1507: External Air Temperature Open/Short-Circuit Detection