Basic Diagnostic Procedure: Procedure: MFD

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW . Using the Check List for Interview, ask the customer the condition of how trouble occurs. Ref. to CHECK , Check List for Interview.	Did you interview the customer?	Go to step 2 .	Interview the customer. Ref. to CHECK , Check List for Interview.
2 CHECK CAN COMMUNICATION . Read the DTC of the CAN system using the Subaru Select Monitor. Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).	Is DTC displayed?	Perform the diagnosis according to the basic diagnostic procedure for LAN system. Ref. to Basic Diagnostic Procedure , Basic Diagnostic Procedure.	Go to step 3 .
3 CHECK MFD . Read the DTC relating the MFD using the Subaru Select Monitor. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .	Is DTC displayed?	Record DTC and time stamp, and perform the diagnosis according to DTC. Ref. to LIST , List of Diagnostic Trouble Code (DTC). For time stamp, refer to "LAN SYSTEM". Ref. to TIME STAMP , CAUTION, General Description.	Go to step 4 .
4 CHECK MFD . Check the MFD display using the system operation check mode of combination meter. Ref. to SYSTEM OPERATION CHECK MODE .	Is the display normal?	System is normal.	Replace the MFD. Ref. to Multi-function Display (MFD) .