LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transaxle & Differential (TY85) (WRX-STI)) >> Clutch Housing >> Installation

Clutch Housing: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the pitching stopper bracket.

    Tightening torque: 

    41 N.m (4.2 kgf-m, 30.2 ft-lb) 

  2. Install the front differential assembly. < Ref. to INSTALLATION , Front Differential Assembly. >
  3. Install the drive pinion shaft assembly. < Ref. to INSTALLATION , Drive Pinion Shaft Assembly. >
  4. Install the individual gear assemblies all at once. < Ref. to INSTALLATION , Main Shaft Assembly. >
  5. Install the transmission case. < Ref. to INSTALLATION , Transmission Case. >
  6. Install the center differential. < Ref. to INSTALLATION , Center Differential. >
  7. Install the transfer driven gear. < Ref. to INSTALLATION , Transfer Driven Gear. >
  8. Install the extension case. < Ref. to INSTALLATION , Extension Case. >
  9. Install the neutral position switch, back-up light switch and harness. < Ref. to INSTALLATION , Neutral Position Switch. > < Ref. to INSTALLATION , Back-up Light Switch. >
  10. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals