LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transaxle & Differential (TY85) (WRX-STI)) >> Center Differential >> Installation

Center Differential: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the needle bearing.
    CAUTION: Apply transmission gear oil onto sliding or revolving surfaces before installation.
  2. Install the adjusting washer and center differential.
  3. When replacing the center differential, select and install the appropriate transfer drive gear and adjusting washer. < Ref. to ADJUSTMENT , Extension Cases. >
  4. Connect the center differential connector, and affix to the oil guide.
  5. Install the transfer driven gear. < Ref. to INSTALLATION , Transfer Driven Gears
  6. Install the extension case. < Ref. to INSTALLATION , Extension Cases. >
  7. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals