LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (H6DO) >> Oil Pump >> Removal

Oil Pump: Removal

  1. Set the vehicle on a lift.
  2. Remove the collector cover.
  3. Disconnect the ground cable from the battery.
  4. Lift-up the vehicle.
  5. Remove the under cover.
  6. Drain engine coolant. <Ref. to DRAINING OF ENGINE COOLANT , Draining Of Engine Coolant.>
  7. Lower the vehicle.
  8. Remove the radiator. <Ref. to REMOVAL , Radiator.>
  9. Remove the V-belts. <Ref. to REMOVAL , V-belt .>
  10. Remove the front chain cover. <Ref. to REMOVAL , Front Chain Cover .>
  11. Remove the timing chain. <Ref. to REMOVAL , Timing Chain Assembly .>
  12. Remove the crank sprocket.
  13. Remove the oil pump cover.
    Fig 1: Identifying Timing Chain Bolts
    G05018926Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the inner rotor and outer rotor.
scientia non olet · About LEMON Manuals