LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H6DO) >> Front Chain Cover >> Removal

Front Chain Cover: Removal

NOTE: Perform the work with the engine installed to body when replacing a single part.
  1. Remove the V-belts. <Ref. to REMOVAL , V-belt .>
  2. Remove the crank pulley. <Ref. to REMOVAL , Crank Pulley .>
  3. Remove the bolts which install oil pipe (RH) onto the front chain cover.
  4. Remove the front chain cover.
    NOTE: Chain cover installation bolt has three different sizes. To prevent the confusion in installation, keep these bolts on container individually.
    Fig 1: Identifying Front Chain Cover Bolt Location
    G05345766Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals