LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H6DO) >> V-belt >> Removal

Engine Mechanical (H6DO): V-belt: Removal

NOTE: Perform the work with the engine installed to body when replacing a single part.
  1. Remove the collector cover.
  2. Install the tool to belt tension adjuster assembly installation bolt.
  3. Rotate the tool clockwise and loosen the V-belt to remove.
    Fig 1: Identifying Tool Clockwise And Loosen V-belt
    G05019567Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals