LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seats, Bunks, Restraint Systems - 212 Chassis - 2 Of 3) >> Testing & Repair >> Remove/install passenger airbag unit - AR91.60-P-0680EW

Remove/install passenger airbag unit - AR91.60-P-0680EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212 

Fig 1: Passenger Airbag Unit Remove/Install Components
G09978095Courtesy of MERCEDES-BENZ USA
MODIFICATION NOTES

24.11.10 Value modified: Nut, front passenger airbag unit to instrument panel   *BA91.60-P-1001-01M 
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. AS91.00-Z-0001-01A
NOTES Notes on performing repair, body work and welding on vehicles with airbags or emergency tensioning retractor units   AH91.00-P-0002-01M
IMPORTANT Assessment of airbag and emergency tensioning retractor units in accident vehicles   AH91.00-P-0006-01B
IMPORTANT Legal regulations on handling and storing airbags and emergency tensioning retractor units   AH91.00-P-0004-01A
1 Remove glove compartment   AR68.10-P-1200EW
2 Remove radio display   AR82.60-P-7722EW
3 Remove cover (1)   AR68.10-P-1000-05EW
4 Unscrew bolt (2)    
5 Unfasten center console (3) and pull back until the instrument panel (13) can be pulled back far enough for the front passenger airbag unit (12) to be removed IMPORTANT Do not disconnect electrical connectors. AR68.20-P-2000EW
6 Unscrew bolts (4)    
7 Remove bolts (5)    
8 Disconnect electrical connector (7) from front passenger airbag squib 1 and electrical connector (8) from front passenger airbag squib 2    
9 Remove A-pillar paneling at top right SPECIAL TOOL Figure
10 Remove air duct (9)    
11 Unscrew bolt (10) TORQUE SPECIFICATION *BA91.60-P-1002-01M 
12 Unscrew nuts (11) TORQUE SPECIFICATION *BA91.60-P-1001-01M 
13 Remove front passenger airbag unit (12) from instrument panel (13) IMPORTANT If the front passenger airbag unit (12) is being replaced, the faulty front passenger airbag unit (12) must be disposed of.
Refer to:
 
REFER TO FORMS Notes on disposing of airbag and emergency tensioning retractor units OS91.00-P-0001-01A
14 Install in the reverse order    
15 Check supplemental restraint system (SRS) with STAR DIAGNOSIS After replacing front passenger airbag unit (12).  
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory AD00.00-P-2000-04A
AIRBAG

Number Designation Model 212
BA91.60-P-1001-01M Nut, front passenger airbag unit to instrument panel Nm 5
BA91.60-P-1002-01M Specification metal screw, front passenger airbag unit to crossmember Nm 3.5
Fig 2: Identifying Mounting Wedge (110 589 03 59 00)
G09978096Courtesy of MERCEDES-BENZ USA