LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Detachable Body Components - 212 Chassis) >> Retrofitting & Conversion >> Retrofit AMG trim parts >> Retrofit AMG trim parts - AZ88.00-P-0001EWA

Retrofit AMG trim parts - AZ88.00-P-0001EWA

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.0/2 as of model year 2014 (Model refinement) 

REMOVING Remove     
1 Print and fill out form "Excerpt from EG type approval" * For Germany only  
2 Remove front bumper MODEL 212.0/2
as of model year 2014 (Model refinement)		  
REFER TO TESTING & REPAIR AR88.20-P-2000EWM 
IMPORTANT Remove parts required for conversion from standard bumper (see conversion instructions).
3 Remove rear bumper    
REFER TO TESTING & REPAIR AR88.20-P-2200EW 
IMPORTANT Remove parts required for conversion from standard bumper (see conversion instructions).
4 Remove left and right longitudinal member paneling    
REFER TO TESTING & REPAIR AR88.80-P-6000EW 
INSTALLING Install     
5 Converting front bumper MODEL 212.0/2
as of model year 2014 (Model refinement)		  
AZ88.00-P-0001-02EWA 
IMPORTANT The trim parts in the accessories and replacement part scope of delivery are primed and should be painted to match the color of the car before installation.
IMPORTANT The parts listed in the parts ordering note in addition to the standard scope and not included in the scope of delivery must be ordered separately according to the specific equipment and national version (see parts ordering note).
6 Install front bumper MODEL 212.0/2
as of model year 2014 (Model refinement)		  
REFER TO TESTING & REPAIR AR88.20-P-2000EWM 
7 Converting rear bumper MODEL 212.0
as of model year 2014 (Model refinement)		 AZ88.00-P-0001-03EWA 
MODEL 212.2
as of model year 2014 (Model refinement)
IMPORTANT The trim parts in the accessories and replacement part scope of delivery are primed and should be painted to match the color of the car before installation.
IMPORTANT The parts listed in the parts ordering note in addition to the standard scope and not included in the scope of delivery must be ordered separately according to the specific equipment and national version (see parts ordering note).		 AZ88.00-P-0001-03ESA 
8 Install rear bumper    
REFER TO TESTING & REPAIR AR88.20-P-2200EW 
9 Install left and right longitudinal member paneling    
REFER TO TESTING & REPAIR AR88.80-P-6000EW 
IMPORTANT The trim parts in the accessories and replacement part scope of delivery are primed and should be painted to match the color of the car before installation.
IMPORTANT Use attachment parts from series production parts and check for damage, replace if necessary
10 Document retrofitted equipment via vehicle documentation (VeDoc) IMPORTANT Attach note "AMG trim parts retrofitted according to AZ88.00-P-0001EWA " under field organization texts to design group 88.  
PARTS ORDERING NOTE

Part no. Designation Quantity
B6 603 6660 Complete front bumper, additional parts must be ordered separately, model 212.0/2 1
A212 885 17 81 ECE license plate molding (order according to national version) 1
A212 885 18 81 License plate molding Switzerland (order according to national version) 1
A212 885 19 81 License plate molding Italy (order according to national version) 1
A212 885 20 81 License plate molding Japan (order according to national version) 1
A212 885 27 81 License plate molding China (order according to national version) 1
A212 885 16 81 License plate molding USA (order according to national version) 1
B6 603 6661 Complete front bumper with CODE (235) Active parking assist, additional parts must be ordered separately model 212.0/2 1
A212 885 17 81 ECE license plate molding (order according to national version) 1
A212 885 18 81 License plate molding Switzerland (order according to national version) 1
A212 885 19 81 License plate molding Italy (order according to national version) 1
A212 885 20 81 License plate molding Japan (order according to national version) 1
A212 885 27 81 License plate molding China (order according to national version) 1
A212 885 16 81 License plate molding USA (order according to national version) 1
B6 603 6662 Longitudinal member paneling (set), model 212.0 1
B6 603 6663 Longitudinal member paneling (set), model 212.2 1
B6 603 6664 Complete rear bumper, additional parts must be ordered separately, model 212.0 1
A 212 805 00 14 Rear switching module sensor bracket 1
A 212 880 71 24 Bottom left rear cover package contents 1
A 212 880 72 24 Bottom right rear cover package contents 1
A 002 984 02 29 Plastic screw, 3x16 mm 4
B6 603 6665 Complete rear bumper with CODE (235) Active parking assist, additional parts must be ordered separately model 212.0 1
A 212 805 00 14 Rear switching module sensor bracket 1
A 212 880 71 24 Bottom left rear cover package contents 1
A 212 880 72 24 Bottom right rear cover package contents 1
A 002 984 02 29 Plastic screw, 3x16 mm 4
B6 603 6666 Complete rear bumper, additional parts must be ordered separately, model 212.2 1
A 212 885 70 14 Center rear radar sensor bracket 1
A 212 805 00 14 Rear switching module sensor bracket 1
A 212 880 71 24 Bottom left rear cover package contents 1
A 212 880 72 24 Bottom right rear cover package contents 1
A 002 984 02 29 Plastic screw, 3x16 mm 4
B6 603 6667 Complete rear bumper with CODE (235) Active parking assist, additional parts must be ordered separately model 212.2 1
A 212 885 70 14 Center rear radar sensor bracket 1
A 212 805 00 14 Rear switching module sensor bracket 1
A 212 880 71 24 Bottom left rear cover package contents 1
A 212 880 72 24 Bottom right rear cover package contents 1
A 002 984 02 29 Plastic screw, 3x16 mm 4
scientia non olet · About LEMON Manuals