General notes: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AH01.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL ALL
| Bolt diagram cylinder head cover | ENGINE 120 | AH01.20-P-5014-04AO | |
| Determine loss of pressure at cylinder | ENGINE ALL, 102, 103, 104, 110, 111, 112, 113, 116, 117, 119, 120, 133, 137, 152, 155, 156, 157, 159, 166, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 285, 601, 602, 603, 604, 605, 606, 611, 612, 613, 617, 628, 629, 642, 646, 647, 648, 651, 668... | AH01.00-N-1300-02A | |
| Determine loss of pressure at cylinder | ENGINE 640... | AH01.00-P-1300-02AL | |
| Firing order | ENGINE 111, 601, 602 | AH01.00-N-0100-01A | |
| General information on inspecting cylinder walls | ENGINE 122, 134, 135, 200, 270, 271, 274, 276, 607, 611, 612, 613, 622, 626, 628, 629, 639, 642, 646, 647, 648, 651... | AH01.00-P-0300-01A | |
| General information on inspecting cylinder walls | ENGINE 133, 156, 177, 178, 276.8 | AH01.00-P-0300-01AMG | |
| General information on inspecting cylinder walls | ENGINE 111, 601, 611.981/987, 612.981, 647.981, 668 | AH01.00-N-0300-01A | |
| General information on inspecting cylinder walls | ENGINE 266.920/940/960/980 in MODEL 169.0/3, 245.2 | AH01.00-P-0300-01AK | |
| General information on inspecting cylinder walls | ENGINE 640 | AH01.00-P-0300-01AL | |
| General information on inspecting cylinder walls | ENGINE 112, 113, 137, 152.9, 157, 166, 272, 273, 275, 277, 279, 285 | AH01.00-P-0300-01VA | |
| General information on inspecting cylinder walls | ENGINE 278 | AH01.00-P-0300-01MM | |
| General information on inspecting cylinder walls | ENGINE 155 | AH01.00-P-0300-01SLR | |
| Information for assigning cylinder head gaskets | ENGINE 642 in MODEL 219.322, 221 | AH01.30-P-1000-06TQ | |
| Information on application of sealant to crankcase bottom section | ENGINE 137.970, 275, 285 | AH01.40-P-1000-03A | |
| Information on application of sealant to crankcase bottom section | ENGINE 281 | AH01.40-P-1000-03SR | |
| Information on application of sealant to crankcase bottom section | ENGINE 628... | AH01.40-P-1000-03B | |
| Information on application of sealant to crankcase bottom section | ENGINE 629 | AH01.40-P-1000-03TJ | |
| Information on application of sealant to crankcase bottom section | ENGINE 159 | AH01.40-P-1000-03RQ | |
| Information on application of sealant to crankcase bottom section | ENGINE 156 | AH01.40-P-1000-03AMG | |
| Information on application of sealant to end cover of crankcase | ENGINE 628... | AH01.40-P-1000-04B | |
| Information on application of sealant to end cover of crankcase | ENGINE 629 At front of engine | AH01.40-P-1000-04TJT | |
| Information on application of sealant to end cover of crankcase | ENGINE 628.963 in MODEL 163.128 | AH01.40-P-1000-04C | |
| Information on application of sealant to end cover of crankcase | ENGINE 651 | AH01.40-P-1000-04CD | |
| Information on application of sealant to end cover of crankcase | ENGINE 137.970, 275, 279 | AH01.40-P-1000-04A | |
| Information on applying sealant to a cylinder head gasket | ENGINE 112 ENGINE 113 ENGINE 112.951 ENGINE 112.976 | AH01.30-P-1000-04VA | |
| Information on applying sealant to cylinder head gasket | ENGINE 113 | AH01.30-P-1000-04V | |
| Information on applying sealant to cylinder head gasket | ENGINE 272, 273 | AH01.30-P-1000-04RX | |
| Information on cylinder head contact surface | ENGINE 112/951/976, 113 | AH01.30-P-1000-05A | |
| Notes for evaluation of a cylinder barrel | ENGINE 132.9, 660.9 in MODEL 451.3/4 ENGINE 160.9 in MODEL 450.3/4, 452.3/4 ENGINE 281 | AH01.40-P-0001-03SM | |
| Notes on application of sealant to crankcase cover | ENGINE 137.970 | AH01.40-P-1000-05A | |
| Notes on application of sealant to cylinder shutoff oil pump | ENGINE 137.970 | AH01.30-P-1000-01A | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 266, 640 in MODEL 169.0/3, 245.2 | AH01.40-P-1000-06AK | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 642 in MODEL 219.322 | AH01.40-P-1000-06TQ | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 166.940/960/961/990/991/995, 668.914/940/941/942 | AH01.40-P-1000-06C | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 642 in MODEL 203, 209 | AH01.40-P-1000-06PI | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 132.9 in MODEL 451.3/4 | AH01.40-P-1000-06MCC | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.40-P-1000-06FF | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 112, 113 | AH01.40-P-1000-06A | |
| Notes on application of sealant to end cover with radial shaft seal | ENGINE 642 in MODEL 211.020/022/084/089/220/222/284/289 | AH01.40-P-1000-06TI | |
| Notes on application of sealant to front cover of the cylinder head | ENGINE 640 in MODEL 169, 245 | AH01.30-P-1000-02AL | |
| Notes on application of sealant to right-hand crankcase | ENGINE 137.970 | AH01.40-P-1000-02A | |
| Notes on application of sealing compound to rear cover at cylinder head | ENGINE 640 in MODEL 169 | AH01.30-P-1000-03AL | |
| Notes on application of sealing compound to rear cover at cylinder head | ENGINE 668.914/940/941/942 | AH01.30-P-1000-03A | |
| Notes on assigning the cylinder head gaskets | ENGINE 642 | AH01.30-P-1000-06TI | |
| Notes on assigning the cylinder head gaskets | ENGINE 642 in MODEL 461, 463 | AH01.30-P-1000-06PI | |
| Notes on assigning the cylinder head gaskets | ENGINE 112 ENGINE 113 | AH01.30-P-1000-06V | |
| Notes on distribution of sealant on crankcase end cover | ENGINE 177 in MODEL 205 | AH01.40-P-1000-09MNA | |
| Notes on position of engine number | MODEL 450.3/4, 452.3/4, 454.0 | AH01.00-P-0001-01FF | |
| Notes on position of engine number | ENGINE 281 in MODEL 453 | AH01.00-P-0001-01SR | |
| Notes on position of engine number | ENGINE 132.9, 660.9 in MODEL 451.3/4 | AH01.00-P-0001-01MCC | |
| Notes on position of engine number | ENGINE 155 | AH01.00-P-0001-01A | |
| Notes on position of engine number | ENGINE 611, 612, 613, 646, 647, 648 | AH01.00-P-0001-01C | |
| Notes on position of engine number | ENGINE 112, 113, 120, 137, 271, 272, 273, 275, 285, 628, 629, 642, 651 | AH01.00-P-0001-01D | |
| Notes on position of engine number | ENGINE 601, 602, 603, 604, 605, 606 | AH01.00-P-0001-01E | |
| Notes on position of engine number | ENGINE 166, 266, 640, 668 | AH01.00-P-0001-01B | |
| Notes on sealant path for cylinder crankcase | ENGINE 152.9, 157, 276, 278 | AH01.40-P-1000-08MM | |
| Notes on sealant path for cylinder head cover | ENGINE 133 | AH01.30-P-1000-08MTA | |
| Notes on sealant path for cylinder head cover | ENGINE 270 | AH01.30-P-1000-08MT | |
| Notes on sealant path for cylinder head cover | ENGINE 622 ENGINE 626 | AH01.30-P-1000-08OLP | |
| Notes on sealant path for cylinder head cover | ENGINE 272 | AH01.30-P-1000-08V | |
| Notes on sealant path for cylinder head cover | ENGINE 122.9 in MODEL 454.0 | AH01.30-P-1000-08FB | |
| Notes on sealant path for cylinder head cover | ENGINE 152.9 | AH01.30-P-1000-08MMI | |
| Notes on sealant path for cylinder head cover | ENGINE 266.980 in MODEL 169.0/3, 245.2 | AH01.30-P-1000-08BK | |
| Notes on sealant path for cylinder head cover | ENGINE 642 | AH01.30-P-1000-08TI | |
| Notes on sealant path for cylinder head cover | ENGINE 266.920/940/960 in MODEL 169.0/3, 245.2 | AH01.30-P-1000-08AK | |
| Notes on sealant path for cylinder head cover | ENGINE 157, 276, 278 | AH01.30-P-1000-08MM | |
| Notes on sealant path for cylinder head cover | ENGINE 642.884/975 in MODEL 461 ENGINE 642.970 in MODEL 463 | AH01.30-P-1000-08GY | |
| Notes on sealant path for cylinder head cover | ENGINE 273 | AH01.30-P-1000-08SX | |
| Notes on sealant path for cylinder head cover | ENGINE 274 | AH01.30-P-1000-08MR | |
| Notes on sealant path for cylinder head cover | ENGINE 177 in MODEL 205 | AH01.30-P-1000-08MNA | |
| Notes on sealant path for cylinder head cover | ENGINE 642 in MODEL 207, 212, 218, 221 | AH01.30-P-1000-08SXI | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 274 | AH01.30-P-1000-02MR | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 157, 276, 278 | AH01.30-P-1000-02MM | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 275, 277, 279, 285 Left cover | AH01.30-P-1000-02D | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 611, 612, 613, 628, 646, 647, 648... | AH01.30-P-1000-02B | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 177 in MODEL 205 | AH01.30-P-1000-02MNA | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 152.9 | AH01.30-P-1000-02MMI | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 133 ENGINE 270 | AH01.30-P-1000-02MT | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 629 | AH01.30-P-1000-02TJ | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 272, 273 | AH01.30-P-1000-02V | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 668.914/940/941/942 | AH01.30-P-1000-02A | |
| Notes on sealant path for front cover to cylinder head xxx | ENGINE 275, 277, 279, 285 Right cover | AH01.30-P-1000-02C | |
| Notes on sealant path for oil pan | ENGINE 160, 660... | AH01.45-P-0001-01SM | |
| Notes on sealant path for oil pan | ENGINE 272 | AH01.45-P-0001-01VA | |
| Notes on sealant path for oil pan | ENGINE 626 | AH01.45-P-0001-01OLP | |
| Notes on sealant path for oil pan | ENGINE 137.970, 275, 277, 279 | AH01.45-P-0001-01A | |
| Notes on sealant path for oil pan | ENGINE 281 | AH01.45-P-0001-01SR | |
| Notes on sealant path for oil pan | ENGINE 273 | AH01.45-P-0001-01SX | |
| Notes on sealant path for oil pan | ENGINE 156 in MODEL 204.077/277 | AH01.45-P-0001-01CMG | |
| Notes on sealant path for oil pan | ENGINE 273 | AH01.45-P-0001-01SY | |
| Notes on sealant path for oil pan | ENGINE 651 in MODEL 117, 156, 176, 246 | AH01.45-P-0001-01OLB | |
| Notes on sealant path for oil pan | ENGINE 629 | AH01.45-P-0001-01TJ | |
| Notes on sealant path for oil pan | ENGINE 628.960/961/962/963 | AH01.45-P-0001-01MA | |
| Notes on sealant path for oil pan | ENGINE 113.964 in MODEL 164.175 ENGINE 113.971 in MODEL 251.075/175 | AH01.45-P-0001-01GZ | |
| Notes on sealant path for oil pan | ENGINE 166.940/960/961/990/991/995, 668.914/940/941/942 | AH01.45-P-0001-01F | |
| Notes on sealant path for oil pan | ENGINE 122.9 in MODEL 454.0 | AH01.45-P-0001-01FB | |
| Notes on sealant path for oil pan | ENGINE 285 | AH01.45-P-0001-01H | |
| Notes on sealant path for oil pan | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.45-P-0001-01FF | |
| Notes on sealant path for oil pan | ENGINE 156... | AH01.45-P-0001-01AMG | |
| Notes on sealant path for oil pan | ENGINE 640 in MODEL 169, 245 | AH01.45-P-0001-01AL | |
| Notes on sealant path for oil pan | ENGINE 133 ENGINE 270 | AH01.45-P-0001-01MT | |
| Notes on sealant path for oil pan | ENGINE 177 in MODEL 205 | AH01.45-P-0001-01MNA | |
| Notes on sealant path for oil pan | ENGINE 642 | AH01.45-P-0001-01OM | |
| Notes on sealant path for oil pan | ENGINE 113.940/943/944/961/980/984 | AH01.45-P-0001-01D | |
| Notes on sealant path for oil pan | ENGINE 112.912/946 | AH01.45-P-0001-01B | |
| Notes on sealant path for oil pan | ENGINE 274 | AH01.45-P-0001-01MR | |
| Notes on sealant path for oil pan | ENGINE 132.9 in MODEL 451.3/4 | AH01.45-P-0001-01MCC | |
| Notes on sealant path for oil pan | ENGINE 156 in MODEL 230.470 | AH01.45-P-0001-01RMG | |
| Notes on sealant path for oil pan | ENGINE 276 | AH01.45-P-0001-01MMA | |
| Notes on sealant path for oil pan | ENGINE 113.941/942/960/962/965/981/982/993 | AH01.45-P-0001-01E | |
| Notes on sealant path for oil pan | ENGINE 155 in MODEL 199 | AH01.45-P-0001-01SLR | |
| Notes on sealant path for oil pan | ENGINE 607 | AH01.45-P-0001-01ORA | |
| Notes on sealant path for oil pan | ENGINE 113.963/967/968/987/988/989/990/991/992/995 | AH01.45-P-0001-01R | |
| Notes on sealant path for oil pan | ENGINE 112 (except 112.912/946) | AH01.45-P-0001-01C | |
| Notes on sealant path for oil pan | ENGINE 160.921/922/923 in MODEL 452.3/4 | AH01.45-P-0001-01RR | |
| Notes on sealant path for oil pan | ENGINE 271 | AH01.45-P-0001-01T | |
| Notes on sealant path for oil pan | ENGINE 651 in MODEL 204, 205, 207, 212, 218, 221, 222 | AH01.45-P-0001-01CD | |
| Notes on sealant path for oil pan | ENGINE 152.9, 157, 278 | AH01.45-P-0001-01MMB | |
| Notes on sealant path for oil pan | ENGINE 266.920/940/960/980 in MODEL 169.0/3, 245.2 | AH01.45-P-0001-01AK | |
| Notes on sealant path for timing case cover | ENGINE 134.9, 135.9 in MODEL 454.0 | AH01.40-P-1000-01FF | |
| Notes on sealant path for timing case cover | ENGINE 660.9 in MODEL 451.3/4 | AH01.40-P-1000-01MCD | |
| Notes on sealant path for timing case cover | ENGINE 640 | AH01.40-P-1000-01AL | |
| Notes on sealant path for timing case cover | ENGINE 271 ENGINE 271.951 in MODEL 906 | AH01.40-P-1000-01TK | |
| Notes on sealant path for timing case cover | ENGINE 152.9, 157, 278 | AH01.40-P-1000-01MMB | |
| Notes on sealant path for timing case cover | ENGINE 159 | AH01.40-P-1000-01RQ | |
| Notes on sealant path for timing case cover | ENGINE 639.939 in MODEL 454.0 | AH01.40-P-1000-01FG | |
| Notes on sealant path for timing case cover | ENGINE 276 | AH01.40-P-1000-01MMA | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 207, 212, 218, 221 | AH01.40-P-1000-01SXI | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 211.020/022/084/089/220/222/284/289/620 | AH01.40-P-1000-01TI | |
| Notes on sealant path for timing case cover | ENGINE 137.970 | AH01.40-P-1000-01A | |
| Notes on sealant path for timing case cover | ENGINE 642.884/975 in MODEL 461 ENGINE 642.970 in MODEL 463 | AH01.40-P-1000-01GY | |
| Notes on sealant path for timing case cover | ENGINE 166.940/960/961/990/991, 668.914/940/941/942 | AH01.40-P-1000-01D | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 219.322 | AH01.40-P-1000-01TQ | |
| Notes on sealant path for timing case cover | ENGINE 275, 277, 279 | AH01.40-P-1000-01C | |
| Notes on sealant path for timing case cover | ENGINE 281 | AH01.40-P-1000-01SR | |
| Notes on sealant path for timing case cover | ENGINE 266.920/940/960/980 in MODEL 169.0/3, 245.2 | AH01.40-P-1000-01AK | |
| Notes on sealant path for timing case cover | ENGINE 132.9 in MODEL 451.3/4 | AH01.40-P-1000-01MCC | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 164, 166, 203, 204, 209, 251.0/1 | AH01.40-P-1000-01PI | |
| Notes on sealant path for timing case cover | ENGINE 651 | AH01.40-P-1000-01CD | |
| Notes on sealant path for timing case cover | ENGINE 272, 273 | AH01.40-P-1000-01VA | |
| Notes on sealant path for timing case cover | ENGINE 611, 612, 613, 646, 647, 648... | AH01.40-P-1000-01E | |
| Notes on sealant path for timing case cover | ENGINE 112, 113 | AH01.40-P-1000-01B | |
| Notes on sealant path for timing case cover | ENGINE 156 | AH01.40-P-1000-01AMG | |
| Notes on sealant path for timing case cover | ENGINE 133 ENGINE 270 | AH01.40-P-1000-01MT | |
| Notes on sealant path for timing case cover | ENGINE 642 in MODEL 222 | AH01.40-P-1000-01LFD | |
| Notes on sealant path for timing case cover | ENGINE 274 | AH01.40-P-1000-01MR | |
| Notes on sealant path for timing case cover | ENGINE 622, 626 | AH01.40-P-1000-01OLP | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 642 in MODEL 219.322 | AH01.30-P-1000-08TQ | |
| Notes on the application of sealing compound to the cylinder head cover | ENGINE 642 in MODEL 164, 203, 209, 251.0/1 | AH01.30-P-1000-08PI | |
| Use of engine no. when installing reconditioned engines and factory-new replacement engines or crankcases | ENGINE ALL | AH01.10-P-0001-01A | |
| Use of unleaded fuel in reconditioned engines | ENGINE 102, 110, 115, 116, 117... | AH01.10-P-1000-01A |