LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Complete Engine - General Information >> General Information >> Notes on application of sealant to end cover with radial shaft seal >> Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06C

Notes on application of sealant to end cover with radial shaft seal - AH01.40-P-1000-06C

ENGINE 166.940/960/961/990/991/995, 668.914/940/941/942 

Sealant application on end cover 

Clean sealing surfaces and apply sealant only to the specified areas in a bead measuring 2.0 mm 0.5 mm. (See illustration below)

IMPORTANT The sealant must be applied within 10 minutes.

Fig 1: Identifying End Cover Sealant Applying Area With Radial Shaft Seal
G10037313Courtesy of MERCEDES-BENZ USA