Notes on assigning the cylinder head gaskets - AH01.30-P-1000-06V
ENGINE 112
ENGINE 113
Illustration shows M112/113
The assignment of the applicable cylinder head gasket on the left and right to the matching engine can be verified when the cylinder heads are installed at the visible round notch between cylinder head and front of crankcase.
Incorrectly installed cylinder head gaskets, e.g. with marking B instead of A, cause a knocking engine noise, particularly at high idling speeds, as the pistons touch the projecting cylinder head gasket. If a complaint exists, replace cylinder head gasket.
Illustration shows M112/113
The assignment of the applicable cylinder head gasket on the left and right to the matching engine can be verified when the cylinder heads are installed at the visible round notch between cylinder head and front of crankcase.
Incorrectly installed cylinder head gaskets, e.g. with marking B instead of A, cause a knocking engine noise, particularly at high idling speeds, as the pistons touch the projecting cylinder head gasket. If a complaint exists, replace cylinder head gasket.