LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (53 - Body Rear - (95B) - MACAN S) >> WM 536855 Replacing (Inner) Rear Wheel Housing >> Preliminary Work >> Preliminary Work For Body Repairs (Without Straightening System)

Preliminary Work For Body Repairs (Without Straightening System)

WARNING: This page is about a different car, the 2017 Porsche Macan, 2016 Porsche Macan, and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessories in the repair area.
    1. 1.1. Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Cover the add-on parts adjacent to the repair area on the vehicle.
    1. 2.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  3. Reshape connection area of the sheetmetal parts to be replaced.
  4. Expose joint areas.
    1. 4.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
  1. Remove outer wheel housing. → 536855 REPLACING (OUTER) REAR WHEEL HOUSING 
  2. Remove upper part of rear cross member. → 510955 REPLACING REAR CROSS MEMBER
  3. Remove roof pillar. → 510555 REPLACING ROOF PILLAR
  4. Remove closing panel. → 530555 REPLACING REAR CLOSING PANEL 
scientia non olet · About LEMON Manuals