Section 4 (2X Petrol, Exhaust, Engine-Electric - General 4.0L Turbo Hybrid -- 971 - PANAMERA (971))

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

WM, 2X00 3D PDF Exhaust System
WM, 2X00 3D PDF Fuel System
WM, 2X00 3D PDF Injection Sensors Actuators
WM, 2X00IN Work Instructions After Disconnecting The Battery
- Effects Of Disconnection Or Total Discharge Of Battery On Electrical Systems In The Vehicle And Precautions To Be Taken
- Test Drive After Disconnecting Battery
WM, 2X00IN Isolation From Power Supply Prior To Performing Maintenance Tasks On Hybrid Vehicles
- General Information
- For This Purpose, Take Into Account Relevant And Qualified Information Sources Such As Local Authorities, Responsible Importers, Associations And Specialist Website. Deliver Items To Be Disposed Of Only To Authorized Reception Points
  - Isolation From Power Supply Prior To Performing Maintenance Tasks On E-Hybrid Vehicles
WM, 2X00IN Handling Lithium-Ion Batteries
- Tools
- General Information
- Classification - Interim Storage - Packaging - Transport
WM, 2X00IN Isolating/Starting Up The High-Voltage System
- Tools
- General Information
- Starting The High-Voltage System
  - Starting High-Voltage Module
WM, 2X00IN Test Log For The Classification Of Lithium-Ion High-Voltage Batteries
- Tools
- Classification
- General Information
- Result Of Classification And Signature
WM, 2X00IN Packing Critical High-Voltage Battery
- Tools
- General Information
- General Information On The Packaging Concept
- Preliminary Work For Packing The High-Voltage Battery
- Packing Critical High-Voltage Battery
WM, 2X00IN Technical Values For High-Voltage Battery
- Technical Values
- Information
  - Technical Values For High-Voltage Battery
WM, 2X00IN Specifications For Preparing A High-Voltage Workplace
- Tools
- General Information
- Specifications For Preparing A High-Voltage Workplace
- Specifications After Assembling A High-Voltage Battery
WM, 2X00IN HV Comparison Sample Catalogue
- General Information
- Information
  - Hv Comparison Sample Catalogue
WM, 2X00IN Technical Values (PHEV)
- Technical Values
- Technical Values For Battery Sensor
- Technical Values For High-Voltage Lines
WM, 2X00IN General Warning Notes For Working On The High-Voltage System
- Tools
- General Warning Notices
  - General Warning Notes For Working On The High-Voltage System
WM, 2X00IN Rules Relating To Cleanliness And Instructions For Working On The Fuel System
- Information
  - Rules Relating To Cleanliness And Instructions For Working On The Fuel System
WM, 2X00IN Basic Safety Instructions For Working With The Fuel System
- Safety Instructions
  - Safety Instructions When Working On The Fuel System
WM, 2X00IN Test Log For Classification Of Lithium-Ion Module
- Tools
- Classification
- General Information
- Result Of Classification And Signature
- Visual
  - Initial Visual Assessment
  - Detailed Visual Assessment
- Thermal
  - Thermal Assessment
- Functional
  - Functional Assessment
- Transport
  - Transport Assessment
WM, 2X00IN Insulation Fault Finding
- Tools
- General Information
- Information On Insulation Fault Finding
- Preliminary Work
- Measurements
WM, 2X00IN Test Log: Pilot Line Fault Finding
- Tools
- Pilot Line Fault Finding
- General Information
- Function Test On High-Voltage Test Adapter Vas 6558/9-6, Vas 6558/9-7 (With MULTIMETER)
- Pilot Line Test
WM, 2X00IN Test Log: Insulation Fault Finding
- Tools
- Insulation Fault Finding
- General Information
- Function Test On High-Voltage Test Adapter Vas 6558/9-6, Vas 6558/9-7 (With MULTIMETER)
- Insulation Test
WM, 2X00IN Function Test On High-Voltage Test Adapter
- Tools
- General Information
- Function Test On High-Voltage Test Adapter
WM, 2X00IN Packing Lithium-Ion Module With Module Status "Warning" (Critical)
- Tools
- General Information
  - Notes
  - Packing Lithium-Ion Module With Module Status "Warning" (Critical)
WM, 2X00IN Packing Lithium-Ion Module With Module Status "Normal" (Not Critical)
- Tools
- General Information
- Packing Lithium-Ion Module With Module Status "Normal" (Not Critical)
WM, 2X00IN Short-Circuit Test On High-Voltage Auxiliary Heater
- Tools
- General Information
- Information: Performing Short-Circuit Test
  - Performing Short-Circuit Test
WM, 2X00IN Test Log: Starting The High-Voltage System
- Tools
- Restarting High-Voltage System
- Completing Documentation
- Additional Check (Visual Inspection)
- Additional Check (Function Test)
- Fault Memory Entries
  - The Following Systems Must Be Free Of Faults And Must Not Contain Any Fault Entries
WM, 2X00IN High-Voltage Topology
- Overview
WM, 2X00IN Packing Non-Critical High-Voltage Battery
- Tools
- Preliminary Work
- Packing High-Voltage Battery In Transport Box
WM, 2X00IN Battery Trickle Charge
- Tools
- Tools And Materials
- Checking Charge State With Battery Tester
- Information
- Connecting The Battery For Trickle Charging
WM, 2X00IN Classification Of A High-Voltage Battery
- Tools
- Information
  - Installation Position Of High-Voltage Battery
- General Warning Notices
- Classification Of A High-Voltage Battery
  - High-Voltage Battery Out Of Vehicle At The Beginning
- Quarantine Of A High-Voltage Battery
  - Quarantine Of A High-Voltage Battery In The Vehicle
WM, 2X00IN Handling Specifications For 12 V/48 V Lithium-Ion Batteries
- Handling Specifications For 12 V/48 V Lithium-Ion Batteries
WM, 2X00IN Test Log: Verifying Absence Of Electric Charge
- Tools
- General Information
- Performing Automatic Verification Of Absence Of Electric Charge Using The PIWIS Tester
- Function Test On High-Voltage Test Adapter (With MULTIMETER)
- MEASUREMENT IN HV DC CIRCUIT AS PER Service Information
- Marking And Signature
WM, 2X00IN Work Instruction For 48 V Vehicle Electrical System
- Technical Values
- General Information
- Information
  - Component Overview And Handling Of 48 V Vehicle Electrical System
- Disconnecting And Starting 48 V Vehicle Electrical System
  - Disconnecting 48 V Vehicle Electrical System
  - Starting The 48 V Vehicle Electrical System
WM, 2X00IN Technical Values (V8 BITURBO)
- Technical Values
  - Overview
  - Aluminium Screws
- Information
  - General Assembly Instructions
- Information 20 - Fuel System, Operation
  - Fuel Tank, Tank Ventilation
- Carbon Canister
- Information 21 - Exhaust Gas Turbocharging
- Information 24 - Fuel System, Electric Injection
- Information 26 - Exhaust System
- Information 27 - Starter, Power Supply
  - Generator V6
  - Starter
- Information 28 - Ignition System
  - Ignition Coils And Sensors
WM, 2X00IN Pilot Line Troubleshooting
- Tools
- General Information
- Information On Pilot Line Troubleshooting
  - Information On Pilot Line Fault Finding
- Preliminary Work
- Performing Measurements
WM, 2X00IN Precautionary Measures When Handling Oxygen Sensors
- Information
  - Specifications When Handling Oxygen Sensors