Packing Lithium-Ion Module With Module Status "Normal" (Not Critical)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification: High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work.
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts.
→ Observe general warning notices for working on the high-voltage system.
> 2X00IN GENERAL WARNING NOTICES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM
Information
The original test log for classification of the lithium-ion module must be kept in the Porsche Centre.
- Place lithium-ion module in the transport box in which the new lithium-ion module was supplied by Porsche AG.
The supplied impact protection in the transport box must be fitted fully around the lithium-ion module.
- Put a copy of the test log for classification of the lithium-ion module in the transport box.
- Close the transport box.
- Affix the following labels on one long side of the transport box:
- "Hazardous goods class 9" label
- "UN 3480, lithium ion batteries" label
- "Item number (small)" label
- Document bag
- Complete accompanying documentation and place it in the document bag together with another copy of the test log for classification of the lithium-ion module.
- Affix "Item number (large)" label on one short side of the transport box.