MEASUREMENT IN HV DC CIRCUIT AS PER Service Information
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Perform function test on voltage tester at the jump-start terminal on the vehicle or at the starter battery using a reference voltage.
Measured voltage: ________ V (Setpoint value: 10.5 V to 14.5 V)
| Measurement for de-energizing the system | Additional measurement | ||
|---|---|---|---|
| Measurement 1: Voltage measurement at HV positive (+) to HV negative (-) | V | V | Setpoint: < 5 V |
| Measurement 2: Voltage measurement at HV positive (+) to body ground (shield) | V | V | Setpoint: < 5 V |
| Measurement 2: Voltage measurement at HV negative (-) to body ground (shield) | V | V | Setpoint: < 5 V |
Perform function test on voltage tester at the jump-start terminal on the vehicle or at the starter battery using a reference voltage.
Measured voltage: ________ V (Setpoint value: 10.5 V to 14.5 V)
Absence of electric charge verified manually: YES □ NO □