LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Engine Mechanical (CUMMINS 5.0L) (1 Of 2)) >> Removal And Installation >> Front Cover >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts and remove the water pump.
    CAUTION: Do not reuse the O-ring.
  2. Remove the vacuum pump assembly from the front cover. Refer to Exploded View .
  3. Remove the water transfer connection. Refer to Exploded View .
  4. Remove the plug.
    CAUTION: Do not reuse the O-ring.
  5. Remove the idler pulley.
  6. Remove the air intake connection bracket and spacer.
  7. Remove the coolant plumbing fitting.
    CAUTION: Do not reuse the O-ring.
  8. Remove the bolts and remove the oil cooler.
    CAUTION: Do not reuse the gasket.
  9. Remove the front oil seal.
    CAUTION: Do not reuse the front oil seal.
  10. Remove the following sensors:
  11. Remove the oil cooler thermostat. Refer to Exploded View .
    CAUTION: Do not reuse the O-ring.
  12. Remove the oil filter bypass valve. Refer to Exploded View .
    CAUTION: Do not reuse oil filter bypass valve.
  13. Remove welch plugs from front cover. Refer to Exploded View .
  14. Remove the oil filter head adapter.
scientia non olet · About LEMON Manuals