REP-TAT-P-5218-01 Removing the backrest covering
Preliminary work
- Remove the front STRAP FITTING
- Remove FRONT SEAT
- Remove INNER COVER
- Remove the COVER for backrest adjustment
- Remove the STEERING LEVER for backrest adjustment
- Remove the LEVER for seat height adjustment
- Remove the OUTER COVER on the front seat
- Remove the THIGH SUPPORT on the front seat
- Remove the SEAT COVER WITH CUSHION
- Remove the REAR PANEL from the front seat backrest
- Remove the TRIM at the bottom of the aperture
- Remove/replace SIDE AIRBAG
- Remove BACKREST SEAT COVER WITH CUSHION
- Release all the clamps on the marked trim wires.
- Release all the clamps on the marked trim wires.
- Remove the backrest cover from the upholstery.
- Remove any remaining clamp chips from the backrest cover and the cushion.