REP-TAT-P-5218-02 Install lumbar support
- Insert the adjuster (2) with Bowden cable in the backrest frame.
- Replace the blind rivets (1)
.
Parts: Blind rivet
- Secure adjuster (2)
with the blind rivet (1)
on the backrest frame.
- Attach lumbar support (3) in holders (1) and backrest frame (2) .
Follow-up work
- Install the BACKREST SEAT COVER WITH CUSHION
- Install/replace SIDE AIRBAG
- Install the TRIM at the bottom of the aperture
- Install the REAR PANEL on the front seat backrest
- Install the OUTER COVER on the front seat
- Install the LEVER for seat height adjustment
- Install the STEERING LEVER for backrest adjustment
- Install the COVER for backrest adjustment
- Install INNER COVER
- Install FRONT SEAT
- Install the front STRAP FITTING