41 35 081 Removing And Installing Front Side Wall On Left: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Observe 41 00... BODY GAP DIMENSIONS .

IMPORTANT: Do not damage adjoining body components.

Necessary preliminary work:

Remove SIDE REPEATER .
Remove wheel arch covers. See REMOVING WHEEL ARCH COVER (FRONT SECTION) and REMOVING WHEEL ARCH COVER (REAR SECTION) .
Remove TRIM PANEL FOR COVER ON SIDE MEMBER .
Partially loosen BUMPER TRIM on the side.
Remove SEAL MOUNTING for engine compartment lid.

Fig 1: Identifying Trim Panel Screws
Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque 41 35 1AZ .

Tightening torque 41 35 2AZ .