54 12 ... Replacing complete glass slide/tilt sunroof frame
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
It is absolutely essential to follow the work steps in the order specified (risk of damage).
Necessary preliminary tasks:
- Remove wind deflector
- Remove gaiter
- Remove glass slide/tilt sunroof lid
- Remove roof liner . See 51 44 011 REMOVING AND INSTALLING OR REPLACING ROOFLINER (WITH SLIDE/TILT SUNROOF) .
- Remove drive unit with gearing . See 67 61 005 REPLACING DRIVE WITH GEAR (FRONT) FOR ACTUATING SLIDE/TILT SUNROOF .
- Remove complete glass slide/tilt sunroof
- Remove rain channel
- Remove headliner
Installation:
Follow the installation sequence from work steps 8 to 1.
Perform the following operations between work steps 3 and 2:
- Adjusting glass slide/tilt sunroof lid
- Initialize glass slide/tilt sunroof