52 14 405 Replacing backrest cover for left or right front seat (convertible): Notes

Necessary preliminary work: 

• Move head restraint towards top
• Remove FRONT SEAT 
• Remove SEAT SIDE AIRBAG 
• Remove TRIM COVER 
• Remove INNER COVER 
• Remove TRIM COVER FOR OUTER FITTING 

Detach backrest cover (1) from backrest frame.

Disengage bracing (2).

Installation: 

Bracing (2) must be fitted under SIDE AIRBAG .

Fig 1: Identifying Backrest Cover And Bracing

Courtesy of BMW OF NORTH AMERICA, INC.

Detach backrest cover (1) from backrest frame.

Fig 2: Identifying Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Detach backrest cover from metal retainer.

Lever out welt in marked area.

Fig 3: Identifying Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Lever backrest cover over attachment point (1).

Fig 4: Identifying Attachment Point

Courtesy of BMW OF NORTH AMERICA, INC.

Release the corresponding plug connections depending on the version and disconnect.

Detach cable tie.

Pull off backrest cover (1) with padding sideways and towards top from backrest frame.

Fig 5: Removing Backrest Cover With Padding Sideways From Backrest Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Release retainers on left/right.

Fig 6: Locating Retainers On Left/Right

Courtesy of BMW OF NORTH AMERICA, INC.

Release all retainers in marked area.

Remove backrest cover from padding.

Fig 7: Identifying Backrest Cover With Padding Retainers Mark Area

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Bend new retainer (2) with special tool 52 0 050.

1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in backrest cover
5. Backrest cover

Fig 8: Identifying Padding, Retainer And Back-Rest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only: 

Pull trim wires out of backrest cover.

Cut new backrest cover to size and insert trim wires.

Fig 9: Identifying Backrest Cover Cutting Dimensions

Courtesy of BMW OF NORTH AMERICA, INC.