52 14... Removing and installing or replacing trim cover for outer fitting on front seat (convertible)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove carrier for front cover

Release screw.

Installation:

Fit tab (1) on cover (2).

Fig 1: Identifying Tab On Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover from guide and turn towards bottom rear.
Unclip cover upwards and remove.

Fig 2: Identifying Cover
Courtesy of BMW OF NORTH AMERICA, INC.