Remove/Install Auxiliary Interior Rearview Mirror - AR68.40-P-0010SG
Model 223
with code X045 (Second additional inside rearview mirror)
with code Z07 (B7 armoring on special protection version)
| Notice | Notes on avoiding damage to windows installed in special high-security vehicles | AH67.00-P-0003-01FB | |
| Remove/install | |||
| 1 | Remove both sun visors. | AR68.60-P-5480S | |
| 2 | Remove front grab handle on front passenger side. | AR68.30-P-4330S | |
| 3 | Remove A-pillar trim on front passenger side. | AR68.30-P-4050S | |
| 4 | Remove inside rearview mirror and allow to hang down. | AR68.40-P-0001S | |
| 5 | Remove overhead control panel control unit. | AR82.20-P-1000S | |
| 6 | Unlock lock (arrows A) and release roof lining (2) from roof. | ||
| 7 | Carefully lower roof lining (2) until screw (3) is accessible. | ||
| 8 | Unscrew screw (3) and guide out check strap (4) under roof lining (2). | ||
| 9 | Unclip additional inside mirror (1) upwards from windshield (5) and remove. | ||
| 10 | Install in the reverse order. |