Adjust Front Door Side Window - AR72.10-P-1960LC

Model 217 

Shown on model 217.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 217.4 

Courtesy of MERCEDES-BENZ USA

Shown on model 217.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 217.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 217.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 217.4 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove
1	Move left and right rear side window to lower end position
2	Remove mirror triangle cover
3	Remove sealing rail from outer front door side window
4	Remove front door lining		AR72.10-P-1000LC
	Check
5	Check adjustments on front door		AR72.10-P-0550LF
6	Mark dimension (b)	Distance between edge of front door and marking	*BE67.30-P-1008-01G
7	Check dimension (a)	Model 217.3 When checking side window. Before adjusting, check actual values. If the adjustment values are correct, search for any window noises at other locations such as the mirror triangle.
		Distance between edge of front door and side window	*BE67.30-P-1007-01G
8	Center threaded hole (2) in elongated hole (3)	When changing side window. Adjust on rear mount of window power (1) in front door.
9	Check dimension (c)	Measure dimension (c) at previously made marking for dimension (b). Before adjusting, check actual values. If the adjustment values are correct, search for any window noises at other locations such as the mirror triangle. Window area to body shell flange	*BE67.30-P-1009-01G
10	Check dimensions (i)	Model 217.3 Before adjusting, check actual values. If the adjustment values are correct, search for any window noises at other locations such as the mirror triangle. Model 217.3Window surface to inner trim piece	*BE67.30-P-1010-01G
	Adjust
11	Perform basic setting	If necessary. Model 217.4	AR72.10-P-1950-03LC
		Model 217.3	AR72.10-P-1950-06LC
		Model 217.3 Distance between edge of front door and side window	*BE67.30-P-1007-01G
		Bolt, side window to power window rail	*BA72.10-P-1007-01X
12	Check height adjustment of front side window	If necessary. Model 217.4	AR72.10-P-1950-05LCA
		Model 217.3	AR72.10-P-1950-05LC
		Insertion depth of side window	*BE67.30-P-1006-01G
		Feeler gauge	Fig 1
13	Adjustment of initial tension	If necessary.	AR72.10-P-1950-03LC
		Model 217.3Window surface to inner trim piece	*BE67.30-P-1010-01G
		Window area to body shell flange	*BE67.30-P-1009-01G
		Distance between edge of front door and marking	*BE67.30-P-1008-01G
		Bolt/nut, power window lifter of side windows to inner panel	*BA67.30-P-1002-01B
		Feeler gauge	Fig 1
		Socket wrench	Fig 2
	Install
14	Install door lining in front door		AR72.10-P-1000LC
15	Install sealing rail on outer front door side window
16	Install mirror triangle cover
17	Move left or right rear side window to upper end position
	Check
18	Check window transition between front side window and rear side window		AR67.30-P-4200-02LC
	Remove
19	Remove rear passenger compartment side trim panel	If test results between front side window and rear side window are incorrect.	AR68.30-P-4780LC
	Adjust
20	Perform basic setting for rear side window	If test results between front side window and rear side window are incorrect.
			AR67.30-P-4200-02LC
		Socket wrench	Fig 2
		Feeler gauge	Fig 1
	Install
21	Install side paneling in rear passenger compartment	If test results between front side window and rear side window are incorrect.	AR68.30-P-4780LC
22	Move rear side window to upper end position	If test results between front side window and rear side window are incorrect.
23	Normalize power window on rear side window	If test results between front side window and rear side window are incorrect. Actuation button for closing rear side window and hold down for approx. 5 s. Then check whether side window opens or closes automatically and correctly.

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Socket Wrench (209 589 00 09 00)

Courtesy of MERCEDES-BENZ USA