Remove/Install Rear-End Door Trim - AR72.20-S-6615E
Model 447.6/7
MODIFICATION NOTES
| 25.01.2017 | Document revised completely. |
Shown On right rear-end doors
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Notes on carrying out repair work in the vehicle interior | AH68.00-D-0001-01KOS | |
| Remove/install | |||
| 1 | Open relevant rear-end door | ||
| 2 | Remove window frame lining of rear-end door | Model 447.7 with code V23 (Interior trim, premium version) except code ZU7 (National version for Canada) except code ZU8 (National version for USA) Model 447.7 with code VK7 (Trim, rear door/liftgate, superior quality) with code ZU7 (National version for Canada) Model 447.7 with code VK7 (Trim, rear door/liftgate, superior quality) with code ZU8 (National version for USA) |
AR72.20-S-6630E |
| 3 | Remove door trim (1) | Door trim (1) made from plastic Model 447.7 |
AR72.20-S-6615-02E |
| Door trim (1) made from fiberboard Model 447.7 | AR72.20-S-6615-03E | ||
| Door trim (1) made from wood Model 447.6 | AR72.20-S-6615-04E | ||
| Fig 1 | |||
| 4 | Install in the reverse order |