(Wiring Diagram For Electronic Selector Lever Module Control Unit - PE27.19-P-2102TAA)
Transmission 722.9 in model 172.4
Control unit N15/5
| Wiring diagram for electronic selector lever module control unit | PE27.19-P-2102-97TAA | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Repair wiring harness as per specified repair method | If the cable colors white or yellow are present, in variation of the wiring diagram, this is a repaired wiring harness. The original wire color is visible again after the repair line (length about 30 cm). | AR00.19-P-0001A | |
| Location and assignment of line and plug connectors | GF00.19-P-1000TAA | ||
| Location and assignment of ground points | GF00.19-P-2000TAA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000TAA | ||
| Fuse and relay box, as-built configuration | GF54.15-P-0800RD | ||
| Abbreviations for wiring diagrams | OV00.01-P-1001-27A | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28TAA | ||
| Search aid for all wiring diagram groups | OV00.01-P-1901TAA | ||
| Use of wiring diagrams | OV00.01-P-1901-03TAA | ||
| Search aid for all electrical components | OV00.01-P-1909TAA |