LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> Sprinter 3500XD 2D Cab Chassis >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Overall Vehicle- Description & Operation, Gen Info, User Info >> Introduction Into Service Manuals >> Introductory Information On The New Start Of A Model Series - SN00.00-D-0008A

Introductory Information On The New Start Of A Model Series - SN00.00-D-0008A

Model 907 with engine 642, 651 

except code ZL3 (National version for Latin America) 

This introductory information presents the technical innovations and modifications of the new Mercedes-Benz Sprinter model 907. In particular, it is intended to provide information in the areas of service, maintenance/repair, and Aftersales. The reader should be familiar with Mercedes-Benz model series currently on the market.

The content-related focus of this introductory information lies in the presentation of new and modified major assemblies and systems. This introductory information is not intended as a basis for repairs or for the diagnosis of technical problems. Further information for this purpose is available in the Workshop Information System (WIS). This is being updated continuously. The information stored there always corresponds to the state of the art of the vehicles. The introductory information presents initial information about the new Mercedes-Benz Sprinter model 907. The content of the introduction information is not subject to the Update Service. Supplements are not envisaged.

Modifications and new features are published in the corresponding literature types in the WIS.

The information in this introductory information corresponds to the status as of the copy deadline in March 2018. It may thus deviate from the actual series production configuration.

Introduction 

The successor of Sprinter model 906 is presented in two versions. Sprinter model 907 with rear wheel drive replaces model 906. With model 910, a Sprinter with front wheel drive is being offered for the first time.

Focuses of the Sprinter model 907 product design compared with the previous model series are:

Overall vehicle SN00.00-D-0001-02A 
Model survey SN00.00-D-3003-01A 
Maintenance strategy SN00.00-D-0080-08A 
Body SN00.00-D-0080-10A 
Technical data SN00.10-D-0010-02A 
Drive SN00.00-D-0080-13A 
Suspension SN00.00-D-0080-02A 
Networking, on-board electrical system SN00.00-D-0080-12A 
Driver assistance systems SN00.00-D-0080-07A 
Information, multimedia and communications systems SN00.00-D-0080-03A 
Exterior lighting SN00.00-D-0080-09A 
Comfort systems SN00.00-D-0080-05A 
Occupant protection SN00.00-D-0080-06A 
Overview of special tools SN00.00-D-0080-11A