Perform Wheel Alignment Check - AR40.20-P-0200EW
Model 172, 207, 212, 218
MODIFICATION NOTES
| 123.10.2018 | Select drive program "Sport", added. | Operation step 11.1 |
| Check | |||
| 1 | Check condition of vehicle. | The specified tolerances of vehicle specified values are only for the test. If the vehicle is adjusted, the specified values should be aimed for. |
|
| 2 | Check condition and tire tread depth of tires. | ||
| AP40.10-P-4052B | |||
| 3 | Check rims for damage. | ||
| 4 | Check and correct tire pressure. | ||
| AP40.15-P-4061A | |||
| 5 | Check vehicle underside for damage and corrosion of suspension, chassis and load-bearing body parts. | ||
| Model 207, 212, 218 | AP60.00-P-0051EW | ||
| Model 172 | AP60.00-P-0051RK | ||
| 6 | Check condition of the steering mechanism. | ||
| Model 212, 218 | AP46.00-P-4653EW | ||
| Model 207 | AP46.00-P-4653CW | ||
| Model 172 | AP46.00-P-4653V | ||
| 7 | Check front axle joints for play and check dust boots for damage. | ||
| Model 212, 218 | AP33.20-P-3353EW | ||
| Model 207 | AP33.20-P-3353CW | ||
| Model 172 | AP33.20-P-3353V | ||
| 8 | Check rear axle joints for play and check dust boots for damage. | ||
| 9 | Check condition of shock absorbers and springs. | ||
| Preparatory tasks | |||
| 10 | Print out form for wheel alignment measurement. | If a visual wheel alignment measurement is performed. | |
| Wheel Alignment Form | OF40.20-P-3000-01B | ||
| 11.1 | Select drive program "Sport". | Model 212, 218 with engine 157 | |
| 11.2 | Select drive program "Comfort". | Model 172, 207 with code 483 (ADVANCED AGILITY package) Model 212 with engine 271, 272, 273, 274, 276, 278, 642, 651 with code 489 (AIRMATIC) Model 218 with engine 274, 276, 278, 642, 651 with code 489 (AIRMATIC) |
|
| 12 | Drive the vehicle onto measuring station and secure using parking brake. | ||
| 13 | Unlock turn and slip plates. | ||
| 14.1 | Raise vehicle level and lower again. | Model 212, 218 with code 489 (AIRMATIC) | |
| 14.2 | Rock vehicle to settle suspension on front and rear axle several times. | Model 172, 207 Model 212, 218 except code 489 (AIRMATIC) |
|
| 15 | Switch off easy entry and exit feature. | Model 172, 218 with code 275 (Memory package) | |
| 16 | Lower window of driver's door. | ||
| 17 | Install the brake pedal jack with the adapter for brake pedal jack between the brake pedal and the driver's seat. | Protect contact surfaces of Otherwise, the brake pedal and driver's seat may be damaged. |
|
| Fig 2 | |||
| Fig 3 | |||
| 18 | Determine vehicle level on front and rear axle using electronic inclinometer. | Model 172, 207 | AR40.20-P-0301CW |
| Model 212, 218 | AR40.20-P-0301EW | ||
| 19 | Attach quick clamping devices at front and rear wheels and remove tensioning levers. | ||
| Fig 1 | |||
| 20 | Attach wheel mirrors or measurement pickups, | ||
| 21 | Attach measuring heads. | ||
| Measure | |||
| 22 | Carry out input measurement. | ||
| 23 | Compare determined values with the specified values. | ||
| 24 | Checking rear axle camber | AR40.20-P-0331CW | |
| 25 | Adjust rear-axle toe | According to results of initial measurement. | |
| Model 172 | AR40.20-P-0261P | ||
| Model 207 | AR40.20-P-0261CW | ||
| Model 212, 218 | AR40.20-P-0261EW | ||
| 26 | Adjust camber and caster at the front axle | According to results of initial measurement. Model 172, 207 |
AR40.20-P-0263CW |
| Model 212, 218 | AR40.20-P-0263EW | ||
| 27 | Adjust front axle toe | According to results of initial measurement. | AR40.20-P-0264CW |
| 28 | Check toe-out angle | AR40.20-P-0325CW | |
| Measure | |||
| 29 | Carry out output measurement. | ||
| Concluding tasks | |||
| 30 | Detach measuring heads. | ||
| 31 | Remove wheel mirrors or measurement pickups. | ||
| 32 | Attach tensioning levers and remove quick clamping devices. | ||
| 33 | Remove brake pedal jack with adapter for brake pedal jack. | ||
| 34 | Lock turn and slip plates. | ||
| 35 | Drive vehicle off measuring system. | ||
| 36 | Switch on easy entry and exit feature. | Model 172, 218 with code 275 (Memory package) |
|
| 37 | Check headlamp adjustment. | ||
| Model 172 | AP82.10-P-8260V | ||
| Model 207, 212, 218 | AP82.10-P-8260EW |