Wiring Diagram For Common Rail Diesel Injection (CDI) Control Unit - Pe07.16-D-2101BA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Mercedes-Benz Sprinter 3500XD, 2018 Mercedes-Benz Sprinter 3500, 2018 Mercedes-Benz Sprinter 2500, 2017 Mercedes-Benz Sprinter 3500XD, and 2017 Mercedes-Benz Sprinter 3500. However, it is still accessible from the selected car via links, so may be relevant.
Engine 651 in model 906.1/2/6 as of 6/1/15
with code MA6 (Emissions category Euro 6b N1 GR.III/N2)
with code MB6 (Low-emission vehicle, Euro 6 Gr. 1)
except code MA4 (Emissions category Euro 5b+ N1 GR.III/N2)
except code MH5 (Low-emission engine EPA 14/CARB)
except code MP6 (Engine version, Euro VI)
except code ZL3 (National version for Latin America)
| Wiring diagram for common rail diesel injection (CDI) control unit | PE07.16-D-2101-97BA |
| Use of wiring diagrams | OV00.01-D-1901-03AA |
| Search aid for all electrical components | OV00.01-D-1909AB |
| Location and assignment of line and electrical plug connectors | GF00.19-D-1004AA |
| Location and assignment of ground points | GF00.19-D-2000AB |
| Location and assignment of Z connector sleeves (line connections in wiring harness) | GF00.19-D-3002AA |
| Fuse and relay box, location/assignment | GF54.15-D-0900AA |