Use Of Wiring Diagrams - OV00.01-D-1901-03AA

MODEL 906 

Wiring diagrams 

• The wiring diagrams are assigned to the familiar function groups 00-91. To make it easier to locate individual circuit diagrams, the systems are listed alphabetically in the "Search aid for all wiring diagram groups"

  OV00.01-D-1901AA  the systems listed alphabetically, specifying the function group/function subgroup.

• The wiring diagrams are filed in the respective function group according to the PE number,

  e.g.: PE07.16-D-2101AA

  PE07.16-D-2101AB

• The wiring diagrams are prepared as function schematics or control unit diagrams and are built up as follows:
• Function schematics

  The control units and electrical components belonging to the function are shown as symbols. The functional connections are realized by direct lines or by the data bus.

• Control unit diagrams

  Control units are represented complete with all connected components. The feed of the control units appears first.

  The wiring diagrams also contain linkages of possible versions and functions.

  Combinations are recognizable as variants, framed and provided with an abbreviated designation.

• The versions denoted by the abbreviated designation "U..." are listed in the legends.
• Line cross-sections and colors may differ from the presentation in the wiring diagrams.

Wiring diagram number 

Courtesy of MERCEDES-BENZ USA

The slash is deleted between base color and identifying color.

Wire Identification 

Courtesy of MERCEDES-BENZ USA

Wire colors: 

BK = Black

BN = Brown

BU = Blue

GN = Green

GY = Gray

OG = Orange

PK = Pink

RD = Red

TR = Transparent

VT = Violet

WH = White

YE = Yellow

Line colors: fuse blocks 

Courtesy of MERCEDES-BENZ USA

Components and switches 

Courtesy of MERCEDES-BENZ USA

• Special features in WIS presentation

  It is possible to select certain areas (red border) and consequently to switch to other documents or wiring diagrams.

• Selection of connectors → Document: Location and assignment of connectors
• Selection of ground points → Document: Location and assignment of ground points
• Selection of Z-connector sleeves → Document: Location and assignment of Z-connector sleeves
• Selection of PE hands → Reference to further wiring diagrams